October 2012 - App_rpt-users - lists.keekles.org

app_rpt svn - The Long version of my insanity
by Richard Gilman 17 Oct '12

17 Oct '12

Hi All, A while ago, I was messing around flashing different firmware images on a Linksys WRT54GL v1.1 access point so I could extend the range a bit. While on that adventure, I noticed a few guys were making hardware modifications to expand their capability. Well, that sounded fun, so I proceeded to add an SD Card socket, 2 Serial Ports and 2 USB ports to that little guy. (Kismet etc. fun... the white hat version of course :-)) After playing around with that for a while, I kept thinking that the WRT54GL might be a candidate for that mobile allstar micro node I’ve been wanting to build. I already had the URIx from DMK and I heard some guys were running Asterisk on these things. The WRT54GL runs on 12vdc, has wireless 802.11b/g and by using my Verizon UML290 on one of the USB ports, it could act as a portable hotspot/unix host. The SD card gives me plenty of room to install Asterisk so being this close already, I decided to give the allstar node a try. I realize that the WRT54GL is at or slightly below the minimum hardware requirements, but it might be just enough to work as a simplex node so here is where I’m at….. 16 Megs of RAM Openwrt Backfire 10.03.1, r29592 2 Gig SD Card ext3 mounted as rootfs 2 Serial ports – 1 for console and the other for GPS 2 USB v1.1 ports – Yeah I know….just maybe though UML290 3g/4g model on 1 USB port - working URIx on the other USB - recognized as sound card Separate 1500 mw regulated 5vdc supply for the MAX 233 ttl to Serial and USB ports Wouxun KG-UV3D - via a URI cable for testing - not tested yet I have the Openwrt buildroot environment setup on another Linux box (Fedora 16 VM)so I can build images and cross compile packages that will run on the Broadcom Chipset. I have the tonezone module compiled and running already but I am still working to get the zaptel kernel module to compile cleanly and then I can work on app_rpt (The Openwrt Astreisk distro doesn't have it). I noticed that the svn code for ACID Linux (Thanks Alan for pointing me in that direction) is optimized for uClibc and so is Openwrt. I’ll see if I can add that as a custom feed and compile it under the buildroot. I’m pretty rusty at this, but it is starting to slowly come back. I know this sounds insane, but I’m having a whole lot of fun with my insanity  Any pointers will be greatly appreciated!!! Thanks, Rich – KJ6NMY 73’s -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request(a)ohnosec.org Sent: Wednesday, October 17, 2012 9:00 AM To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 44, Issue 33 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: App_rpt-users Digest, Vol 44, Issue 32 (Bradley Haney) ---------------------------------------------------------------------- Message: 1 Date: Wed, 17 Oct 2012 10:31:48 -0500 From: Bradley Haney <kc9gqr(a)gmail.com> To: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 44, Issue 32 Message-ID: <CAPg-ThQ+847_hyUbKpRRw4=bW=jM_P6hgHydJwwQ3kLJ1+h5Eg(a)mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 If anyone is using a Zxeyl DSL modem don't use the routing functions.. Bridge it and use a different router.. I had the same problem and swapped several modems out from the DSL company and still same out come. Once i bridged the modem and put a router in line it works 24/7 with no problem.. On Wed, Oct 17, 2012 at 9:15 AM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Cant connect one more time! (Jim W7RY) > 2. Re: Cant connect one more time! (Jim W7RY) > 3. app_rpt svn (Richard Gilman) > 4. Re: app_rpt svn (Jim Duuuude) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 16 Oct 2012 21:01:22 -0700 > From: "Jim W7RY" <w7ry(a)centurytel.net> > To: <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] Cant connect one more time! > Message-ID: <7340A5C3255A497A9FE45D156646031E@JimsLaptop> > Content-Type: text/plain; charset="utf-8" > > Why cant I connect? I?m about ready to just shut it off... I don?t need the headache! > > Jim W7RY > > > > w7ry*CLI> iax2 show registry > Host dnsmgr Username Perceived Refresh State > 67.215.233.178:4569 N 28238 76.9.248.101:4569 60 Registered > w7ry*CLI> rpt fun 28238 *32560 > -- Call accepted by 208.70.77.197 (format ulaw) > -- Format for call is ulaw > -- Hungup 'IAX2/208.70.77.197:4569-643' > -- Hungup 'Zap/pseudo-1681955686' > -- Hungup 'Zap/pseudo-740754801' > -- <Zap/pseudo-662374073> Playing 'rpt/node' (language 'en') > -- <Zap/pseudo-662374073> Playing 'digits/2' (language 'en') > -- <Zap/pseudo-662374073> Playing 'digits/5' (language 'en') > -- <Zap/pseudo-662374073> Playing 'digits/6' (language 'en') > -- <Zap/pseudo-662374073> Playing 'digits/0' (language 'en') > -- <Zap/pseudo-662374073> Playing 'rpt/connection_failed' (language 'en') > -- Hungup 'Zap/pseudo-662374073' > w7ry*CLI> w7ry*CLI> iax2 show registry > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121016/9feab > 30f/attachment-0001.html> > > ------------------------------ > > Message: 2 > Date: Tue, 16 Oct 2012 21:14:34 -0700 > From: "Jim W7RY" <w7ry(a)centurytel.net> > To: <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Cant connect one more time! > Message-ID: <9EC1A048D3A2457284667E18BC100DE3@JimsLaptop> > Content-Type: text/plain; charset="utf-8" > > Had to reboot to get it to connect which I have to do frequently. > > All of you ?I haven't rebooted my node for 2 years? folks care to weigh in as to why I have to reboot to get it to connect? > > 73 > Jim W7RY > > > > From: Jim W7RY > Sent: Tuesday, October 16, 2012 9:01 PM > To: app_rpt-users(a)ohnosec.org > Subject: [App_rpt-users] Cant connect one more time! > > Why cant I connect? I?m about ready to just shut it off... I don?t need the headache! > > Jim W7RY > > > > w7ry*CLI> iax2 show registry > Host dnsmgr Username Perceived Refresh State > 67.215.233.178:4569 N 28238 76.9.248.101:4569 60 Registered > w7ry*CLI> rpt fun 28238 *32560 > -- Call accepted by 208.70.77.197 (format ulaw) > -- Format for call is ulaw > -- Hungup 'IAX2/208.70.77.197:4569-643' > -- Hungup 'Zap/pseudo-1681955686' > -- Hungup 'Zap/pseudo-740754801' > -- <Zap/pseudo-662374073> Playing 'rpt/node' (language 'en') > -- <Zap/pseudo-662374073> Playing 'digits/2' (language 'en') > -- <Zap/pseudo-662374073> Playing 'digits/5' (language 'en') > -- <Zap/pseudo-662374073> Playing 'digits/6' (language 'en') > -- <Zap/pseudo-662374073> Playing 'digits/0' (language 'en') > -- <Zap/pseudo-662374073> Playing 'rpt/connection_failed' (language 'en') > -- Hungup 'Zap/pseudo-662374073' > w7ry*CLI> w7ry*CLI> iax2 show registry > > > ---------------------------------------------------------------------- > ---------- _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121016/d03cd > 8c2/attachment-0001.html> > > ------------------------------ > > Message: 3 > Date: Wed, 17 Oct 2012 07:07:30 -0700 > From: "Richard Gilman" <rgilman(a)myndzi.com> > To: <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] app_rpt svn > Message-ID: <35bb01cdac70$bf8b1450$3ea13cf0$@com> > Content-Type: text/plain; charset="us-ascii" > > Hi All, > > First, I'd like to apologize in advance for being a nooby here, but I > guess we all start out that way :-) > > My question is...where can I find the latest version of app_rpt from svn? > The link on the "Manual Configure Support Page" is not working and I'm > not finding much via web searches. > > I need to cross compile it to run on an embedded system project I am > working on. > > Thanks, > > Rich - KJ6NMY > 73's > > > > -----Original Message----- > From: app_rpt-users-bounces(a)ohnosec.org > [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of > app_rpt-users-request(a)ohnosec.org > Sent: Monday, October 15, 2012 9:00 AM > To: app_rpt-users(a)ohnosec.org > Subject: App_rpt-users Digest, Vol 44, Issue 31 > > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than > "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. +++ RTCM and digital Transceiver +++ (kbaumann) > 2. Re: Alternate IAX port >> bind port not working - the fix > (Jon Rorke) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 14 Oct 2012 19:40:00 +0200 > From: "kbaumann" <kbaumann(a)chello.at> > To: <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] +++ RTCM and digital Transceiver +++ > Message-ID: <000501cdaa32$ef837930$ce8a6b90$@at> > Content-Type: text/plain; charset="us-ascii" > > Hi, > > Because my first RTCM works perfect with our local Fm Repeater i would > like to connect a Motorola Tetra mobile with the second RTCM. > > The problem is: there is no COR Signal and also there is no > discriminator noise (only ready to go audio) to adjust the Squelch. Is > there a solution to bring them together? > > The SQL is not adjustable - JP1 ON or OFF gives no solution. > > > > Thank you > > Kurt > > OE1KBC > > > > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121014/e0b17 > c64/at > tachment-0001.html> > > ------------------------------ > > Message: 2 > Date: Mon, 15 Oct 2012 10:03:11 -0400 > From: Jon Rorke <jrorke(a)cogeco.ca> > Cc: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] Alternate IAX port >> bind port not > working - the fix > Message-ID: <507C179F.3050307(a)cogeco.ca> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > OK I now have it working for me. > The bindport in IAX.conf needed to be changed to 4570 and then server > info on the Allstar portal also needed to be changed. > > Thanks to Brian for the missing piece of info. The last time I had to > do this was when there was no portal config. > > Jon VA3RQ > >> have you changed the port you use AT the portal? ie the server >> configuration, network configuration tab? >> >> if you have a node that needs to be on a different port, the >> underlying server needs to be moved both at the end, as well as at >> the mother ship. >> >> had the same problem until i had everything lined up. >> >> -- >> Bryan >> Sent from my iPhone 5 >> please forgive misspellings... > > > > On 10/12/2012 11:31 AM, George Csahanin wrote: >> On my node 28599 here's where I had to make mods to reflect using >> port >> 4570: >> root@nat:/etc/asterisk <mailto:root@nat:/etc/asterisk># grep 4570 * >> iax.conf:bindport=4570 >> iax_rpt_custom.conf:bindport=4570 >> root@nat:/etc/asterisk <mailto:root@nat:/etc/asterisk># There are no >> ports indicated in rpt.conf. >> It all works fine, others can connect, and webtransceiver works fine. >> I also do not use portal configuration as it won't let me ser CW ID >> at >> 30 WPM >> GeorgeC >> >> ----- Original Message ----- >> *From:* Robert Poff <mailto:wb3awj@comcast.net> >> *To:* app_rpt-users(a)ohnosec.org <mailto:app_rpt-users@ohnosec.org> >> *Sent:* Friday, October 12, 2012 8:32 AM >> *Subject:* Re: [App_rpt-users] Alternate IAX port >> bind port not >> working >> >> Just for drill... if you move into /etc/asterisk and do "fgrep >> 4569 *" and "fgrep 4570 *". >> What do get back? >> >> Here's what I see with my alternate port 4565 (on XIPAR) : >> iax_general_custom.conf:bindport=4565 >> rpt.conf:28695 = radio(a)127.0.0.1 >> <mailto:radio@127.0.0.1>:4565/28695,NONE ;KVHF 10m >> Receiver - ME >> rpt.conf:12958 = radio(a)209.213.169.196 >> <mailto:radio@209.213.169.196>:4565/12958,NONE ;KVHF 10m >> Transmitter >> >> -- >> /Robert A. Poff/ >> /Loganville, PA/ >> >> */S/V Loon <http://wb3awj.hobby-site.org/loon.htm>/* >> /1983 Hunter 34/ >> /Havre de Grace, MD./ >> >> WB3AWJ/- Allstar 27784/ >> /Powered by Linux/ >> >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121015/da092 > 329/at > tachment-0001.html> > > ------------------------------ > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > End of App_rpt-users Digest, Vol 44, Issue 31 > ********************************************* > > > > > ------------------------------ > > Message: 4 > Date: Wed, 17 Oct 2012 07:15:09 -0700 > From: Jim Duuuude <telesistant(a)hotmail.com> > To: <rgilman(a)myndzi.com>, app_rpt mailing list > <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] app_rpt svn > Message-ID: <BLU155-W4B2AD3EFCF62D107701E9B1770(a)phx.gbl> > Content-Type: text/plain; charset="iso-8859-1" > > > Youre right.. svn.ohnosec.org seems to be poo-ped at the moment.. Ill > send a message to the ohnosec.org dude and see what is going on. > >> From: rgilman(a)myndzi.com >> To: app_rpt-users(a)ohnosec.org >> Date: Wed, 17 Oct 2012 07:07:30 -0700 >> Subject: [App_rpt-users] app_rpt svn >> >> Hi All, >> >> First, I'd like to apologize in advance for being a nooby here, but I >> guess we all start out that way :-) >> >> My question is...where can I find the latest version of app_rpt from svn? >> The link on the "Manual Configure Support Page" is not working and >> I'm not finding much via web searches. >> >> I need to cross compile it to run on an embedded system project I am >> working on. >> >> Thanks, >> >> Rich - KJ6NMY >> 73's >> >> >> >> -----Original Message----- >> From: app_rpt-users-bounces(a)ohnosec.org >> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of >> app_rpt-users-request(a)ohnosec.org >> Sent: Monday, October 15, 2012 9:00 AM >> To: app_rpt-users(a)ohnosec.org >> Subject: App_rpt-users Digest, Vol 44, Issue 31 >> >> Send App_rpt-users mailing list submissions to >> app_rpt-users(a)ohnosec.org >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> or, via email, send a message with subject or body 'help' to >> app_rpt-users-request(a)ohnosec.org >> >> You can reach the person managing the list at >> app_rpt-users-owner(a)ohnosec.org >> >> When replying, please edit your Subject line so it is more specific >> than >> "Re: Contents of App_rpt-users digest..." >> >> >> Today's Topics: >> >> 1. +++ RTCM and digital Transceiver +++ (kbaumann) >> 2. Re: Alternate IAX port >> bind port not working - the fix >> (Jon Rorke) >> >> >> --------------------------------------------------------------------- >> - >> >> Message: 1 >> Date: Sun, 14 Oct 2012 19:40:00 +0200 >> From: "kbaumann" <kbaumann(a)chello.at> >> To: <app_rpt-users(a)ohnosec.org> >> Subject: [App_rpt-users] +++ RTCM and digital Transceiver +++ >> Message-ID: <000501cdaa32$ef837930$ce8a6b90$@at> >> Content-Type: text/plain; charset="us-ascii" >> >> Hi, >> >> Because my first RTCM works perfect with our local Fm Repeater i >> would like to connect a Motorola Tetra mobile with the second RTCM. >> >> The problem is: there is no COR Signal and also there is no >> discriminator noise (only ready to go audio) to adjust the Squelch. >> Is there a solution to bring them together? >> >> The SQL is not adjustable - JP1 ON or OFF gives no solution. >> >> >> >> Thank you >> >> Kurt >> >> OE1KBC >> >> >> >> -------------- next part -------------- An HTML attachment was >> scrubbed... >> URL: >> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121014/e0b1 >> 7c64/at >> tachment-0001.html> >> >> ------------------------------ >> >> Message: 2 >> Date: Mon, 15 Oct 2012 10:03:11 -0400 >> From: Jon Rorke <jrorke(a)cogeco.ca> >> Cc: app_rpt-users(a)ohnosec.org >> Subject: Re: [App_rpt-users] Alternate IAX port >> bind port not >> working - the fix >> Message-ID: <507C179F.3050307(a)cogeco.ca> >> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" >> >> OK I now have it working for me. >> The bindport in IAX.conf needed to be changed to 4570 and then server >> info on the Allstar portal also needed to be changed. >> >> Thanks to Brian for the missing piece of info. The last time I had to >> do this was when there was no portal config. >> >> Jon VA3RQ >> >> > have you changed the port you use AT the portal? ie the server >> > configuration, network configuration tab? >> > >> > if you have a node that needs to be on a different port, the >> > underlying server needs to be moved both at the end, as well as at >> > the mother ship. >> > >> > had the same problem until i had everything lined up. >> > >> > -- >> > Bryan >> > Sent from my iPhone 5 >> > please forgive misspellings... >> >> >> >> On 10/12/2012 11:31 AM, George Csahanin wrote: >> > On my node 28599 here's where I had to make mods to reflect using >> > port >> > 4570: >> > root@nat:/etc/asterisk <mailto:root@nat:/etc/asterisk># grep 4570 * >> > iax.conf:bindport=4570 >> > iax_rpt_custom.conf:bindport=4570 >> > root@nat:/etc/asterisk <mailto:root@nat:/etc/asterisk># There are >> > no ports indicated in rpt.conf. >> > It all works fine, others can connect, and webtransceiver works fine. >> > I also do not use portal configuration as it won't let me ser CW ID >> > at >> > 30 WPM >> > GeorgeC >> > >> > ----- Original Message ----- >> > *From:* Robert Poff <mailto:wb3awj@comcast.net> >> > *To:* app_rpt-users(a)ohnosec.org <mailto:app_rpt-users@ohnosec.org> >> > *Sent:* Friday, October 12, 2012 8:32 AM >> > *Subject:* Re: [App_rpt-users] Alternate IAX port >> bind port not >> > working >> > >> > Just for drill... if you move into /etc/asterisk and do "fgrep >> > 4569 *" and "fgrep 4570 *". >> > What do get back? >> > >> > Here's what I see with my alternate port 4565 (on XIPAR) : >> > iax_general_custom.conf:bindport=4565 >> > rpt.conf:28695 = radio(a)127.0.0.1 >> > <mailto:radio@127.0.0.1>:4565/28695,NONE ;KVHF 10m >> > Receiver - ME >> > rpt.conf:12958 = radio(a)209.213.169.196 >> > <mailto:radio@209.213.169.196>:4565/12958,NONE ;KVHF 10m >> > Transmitter >> > >> > -- >> > /Robert A. Poff/ >> > /Loganville, PA/ >> > >> > */S/V Loon <http://wb3awj.hobby-site.org/loon.htm>/* >> > /1983 Hunter 34/ >> > /Havre de Grace, MD./ >> > >> > WB3AWJ/- Allstar 27784/ >> > /Powered by Linux/ >> > >> > >> > >> > >> > _______________________________________________ >> > App_rpt-users mailing list >> > App_rpt-users(a)ohnosec.org >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> -------------- next part -------------- An HTML attachment was >> scrubbed... >> URL: >> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121015/da09 >> 2329/at >> tachment-0001.html> >> >> ------------------------------ >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> >> End of App_rpt-users Digest, Vol 44, Issue 31 >> ********************************************* >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121017/8ff2a > 6ed/attachment.html> > > ------------------------------ > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > End of App_rpt-users Digest, Vol 44, Issue 32 > ********************************************* ------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users End of App_rpt-users Digest, Vol 44, Issue 33 *********************************************

1 0

app_rpt svn
by Richard Gilman 17 Oct '12

17 Oct '12

Hi All, First, I'd like to apologize in advance for being a nooby here, but I guess we all start out that way :-) My question is...where can I find the latest version of app_rpt from svn? The link on the "Manual Configure Support Page" is not working and I'm not finding much via web searches. I need to cross compile it to run on an embedded system project I am working on. Thanks, Rich - KJ6NMY 73's -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request(a)ohnosec.org Sent: Monday, October 15, 2012 9:00 AM To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 44, Issue 31 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. +++ RTCM and digital Transceiver +++ (kbaumann) 2. Re: Alternate IAX port >> bind port not working - the fix (Jon Rorke) ---------------------------------------------------------------------- Message: 1 Date: Sun, 14 Oct 2012 19:40:00 +0200 From: "kbaumann" <kbaumann(a)chello.at> To: <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] +++ RTCM and digital Transceiver +++ Message-ID: <000501cdaa32$ef837930$ce8a6b90$@at> Content-Type: text/plain; charset="us-ascii" Hi, Because my first RTCM works perfect with our local Fm Repeater i would like to connect a Motorola Tetra mobile with the second RTCM. The problem is: there is no COR Signal and also there is no discriminator noise (only ready to go audio) to adjust the Squelch. Is there a solution to bring them together? The SQL is not adjustable - JP1 ON or OFF gives no solution. Thank you Kurt OE1KBC

2 1

Cant connect one more time!
by Jim W7RY 17 Oct '12

17 Oct '12

Why cant I connect? I’m about ready to just shut it off... I don’t need the headache! Jim W7RY w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 76.9.248.101:4569 60 Registered w7ry*CLI> rpt fun 28238 *32560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-643' -- Hungup 'Zap/pseudo-1681955686' -- Hungup 'Zap/pseudo-740754801' -- <Zap/pseudo-662374073> Playing 'rpt/node' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/2' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/5' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/6' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/0' (language 'en') -- <Zap/pseudo-662374073> Playing 'rpt/connection_failed' (language 'en') -- Hungup 'Zap/pseudo-662374073' w7ry*CLI> w7ry*CLI> iax2 show registry

1 1

Re: [App_rpt-users] Alternate IAX port >> Registered ok but not listed?
by Kevin Oleniczak 15 Oct '12

15 Oct '12

I finally got this working. To close this out, here's what i found. It turns out the issue was that i had binaddr listed above bindport in iax.conf. In order for bindport to get used, it has to appear in the file before bindaddr. thanks to all who helped with this. On Tue, Oct 9, 2012 at 8:40 PM, Tim Sawyer <tim.sawyer(a)mac.com> wrote: > Try changing your IP address setting on the Portal to either DHCP or > Fixed. I don't know what the VoIP setting you currently have it set for > does. > -- > Tim > :wq > > On Oct 9, 2012, at 5:29 PM, Kevin Oleniczak <kevinoleniczak(a)gmail.com> > wrote: > > I had already done that in the portal but it still wasn't working. As an > experiment, i changed everything back to the original 4569 port and > forwarded that on my router. I could then connect with the webtransceiver. > However i can't leave it there and need to get it to work on an alternate > port. It seems from my testing that something is hard set to port 4569 on > the allstar end of things? > > ideas? > > thank you > > On Tue, Oct 9, 2012 at 3:47 AM, Ken <ke2n(a)cs.com> wrote: > >> Yes – you need to log onto the portal and get to the server configuration >> tab – there is a place there to change to port number that the registration >> server is talking to.**** >> >> ** ** >> >> ** ** >> >> Ken**** >> >> ** ** >> >> ** ** >> >> *From:* app_rpt-users-bounces(a)ohnosec.org [mailto: >> app_rpt-users-bounces(a)ohnosec.org] *On Behalf Of *Kevin Oleniczak >> *Sent:* Tuesday, October 09, 2012 12:09 AM >> *To:* app_rpt-users(a)ohnosec.org >> *Subject:* [App_rpt-users] Alternate IAX port >> Registered ok but not >> listed?**** >> >> ** ** >> >> I am unable to connect to my node from the webtransceiver and don't see >> it listed on the active nodes page. I use an alternate iax port because i >> have to. **** >> >> From reading other posts… it seems I may need an admin to change my iax >> port from 4569 to what I now want to use which is 4570? thoughts?**** >> >> **** >> >> My registration is still showing 4569 and am forwarding 4570 on my router >> to my ACID box.**** >> >> **** >> >> cruiser*CLI> iax2 show registry**** >> >> Host dnsmgr Username Perceived Refresh >> State**** >> >> <myip>:4569 N 28970 <myip>:4569 60 Registered**** >> >> **** >> >> I’m not seeing my node show up and believe this is the cause. In my >> iax.conf I have bindport set 4570 and also in server config under network I >> set port 4570 on the portal.**** >> >> **** >> >> looking at rpt_extnodes i see my node listed with the correct port...**** >> >> ** ** >> >> 28970=radio@<myip>:4570/28970,<myip>**** >> >> ** ** >> >> ** ** >> >> [general]**** >> >> bindaddr=0.0.0.0**** >> >> bindport=4570**** >> >> ....**** >> >> **** >> >> register=28970:<mypasswd>@register.allstarlink.org**** >> >> **** >> >> ** ** >> > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > >

6 6

+++ RTCM and digital Transceiver +++
by kbaumann 14 Oct '12

14 Oct '12

Hi, Because my first RTCM works perfect with our local Fm Repeater i would like to connect a Motorola Tetra mobile with the second RTCM. The problem is: there is no COR Signal and also there is no discriminator noise (only ready to go audio) to adjust the Squelch. Is there a solution to bring them together? The SQL is not adjustable - JP1 ON or OFF gives no solution. Thank you Kurt OE1KBC

1 0

Re: [App_rpt-users] Ok, what memo did I miss
by Alan Adamson 13 Oct '12

13 Oct '12

Further, I show up on the *blue screen list* as everything ok, but I show ad not registered on the public status screen (no green box, but very large numbers and not registered since showing). and worse, I can't connect to any other nodes. Ok, who broke it. I promise I didn't change anything since July or there abouts. Alan From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Alan Adamson Sent: Friday, October 12, 2012 2:57 PM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] Ok, what memo did I miss I've not changed any one thing on my server in months and yet today I went to see what my status was shown as I was going some testing and *NONE* of my nodes are shown as active (green box highlight) on the allstar status page. Ok, what do I have to change? Alan

4 4

Ok, what memo did I miss
by Alan Adamson 12 Oct '12

12 Oct '12

I've not changed any one thing on my server in months and yet today I went to see what my status was shown as I was going some testing and *NONE* of my nodes are shown as active (green box highlight) on the allstar status page. Ok, what do I have to change? Alan

1 0

app_gps aprs server settings
by Heikki Hannikainen 12 Oct '12

12 Oct '12

Hi everyone, I'm Hessu, OH7LZB. I run the aprs.fi web service. If you're currently using app_gps and reporting to APRS with it, please read this: app_gps default server configuration in app_gps.c, and on the documentation web page at http://ohnosec.org/drupal/node/179, points only to a single APRS-IS server (second.aprs.net) That server is currently full most of the day (300 users) and does not accept new clients. Due to outages on other servers it has been full for several weeks, leaving some users out, probably including some app_gps users who are only trying to connect second.aprs.net. Please update your gps.conf to say either: server = rotate.aprs2.net port = 14580 or server = rotate.aprs.net port = 14580 rotate.aprs.net points to all 9 APRS-IS core servers (2 of those down currently), and using that will get you automatically connected to one of those (not just the second in row which is currently full). If you choose to use rotate.aprs2.net, you will end up on one of over 80 Tier2 servers which have a Dynamic DNS setup (rotate.aprs2.net always points to a smaller subset of servers which have been tested and verified to be available and not full right now). This way you'll get connected even if second.aprs.net would happen to be full or down (and it wouldn't be full if everyone used the rotate addresses, anyway). I've submitted a little bug ticket with a little patch in mantis to change the defaults and examples: http://ohnosec.org/mantis/view.php?id=80 Thank you! - Hessu

1 0

All Star VoIP service
by Michael Hebert 12 Oct '12

12 Oct '12

Can someone please point in the direction to find the All Star VoIP monthly service? Thanks, Mike KD5DFB

2 1

Re: [App_rpt-users] Alternate IAX port >> Registered ok but not listed?
by Kevin Oleniczak 12 Oct '12

12 Oct '12

I had already done that in the portal but it still wasn't working. As an experiment, i changed everything back to the original 4569 port and forwarded that on my router. I could then connect with the webtransceiver. However i can't leave it there and need to get it to work on an alternate port. It seems from my testing that something is hard set to port 4569 on the allstar end of things? ideas? thank you On Tue, Oct 9, 2012 at 3:47 AM, Ken <ke2n(a)cs.com> wrote: > Yes – you need to log onto the portal and get to the server configuration > tab – there is a place there to change to port number that the registration > server is talking to.**** > > ** ** > > ** ** > > Ken**** > > ** ** > > ** ** > > *From:* app_rpt-users-bounces(a)ohnosec.org [mailto: > app_rpt-users-bounces(a)ohnosec.org] *On Behalf Of *Kevin Oleniczak > *Sent:* Tuesday, October 09, 2012 12:09 AM > *To:* app_rpt-users(a)ohnosec.org > *Subject:* [App_rpt-users] Alternate IAX port >> Registered ok but not > listed?**** > > ** ** > > I am unable to connect to my node from the webtransceiver and don't see it > listed on the active nodes page. I use an alternate iax port because i have > to. **** > > From reading other posts… it seems I may need an admin to change my iax > port from 4569 to what I now want to use which is 4570? thoughts?**** > > **** > > My registration is still showing 4569 and am forwarding 4570 on my router > to my ACID box.**** > > **** > > cruiser*CLI> iax2 show registry**** > > Host dnsmgr Username Perceived Refresh > State**** > > <myip>:4569 N 28970 <myip>:4569 60 Registered**** > > **** > > I’m not seeing my node show up and believe this is the cause. In my > iax.conf I have bindport set 4570 and also in server config under network I > set port 4570 on the portal.**** > > **** > > looking at rpt_extnodes i see my node listed with the correct port...**** > > ** ** > > 28970=radio@<myip>:4570/28970,<myip>**** > > ** ** > > ** ** > > [general]**** > > bindaddr=0.0.0.0**** > > bindport=4570**** > > ....**** > > **** > > register=28970:<mypasswd>@register.allstarlink.org**** > > **** > > ** ** >

4 3