September 2012 - App_rpt-users

Installing aprx on ACID
by Michael Hebert 18 Sep '12

18 Sep '12

All, Has anyone installed aprx on a ACID machine? If so, can you please give me some direction. Mike KD5DFB

1 0

duplex=3
by Bradley Haney 18 Sep '12

18 Sep '12

Question about this mode.. 3 = full-duplex mode, without repeated audio from main input source when trying out this mode it appears to still TX on the main Input source. We have this connected to our vx7000 repeater and We want full duplex coming in all the time and I think this is the mode i need but when i set it to this it still tx's on main audio input. We want full duplex audio coming in even if the repeater is TXing so we can hang up on a autopatch call if the repeater is in TX mode.. Any thoughts on why duplex =3 still Tx's on main audio input?

1 0

transmit hangs on reboot
by Stephen Liggett 17 Sep '12

17 Sep '12

Group, I have recently noted that when I reboot that the transmit remains on, and I have to shell in and do a *71 to turn it off. After that, all is OK. I use the DMK URI, fed to the remote base input of our repeater controller. In the past, I recall that from a start or reboot that the transmitter would key for a few seconds and then shut off, but not anymore. Without a lot of troubleshooting, is there a way to insert a *71 command somewhere in the startup sequence? I am not exactly sure what I am talking about here as far as this fix is concerned. Any ideas? steve W3YT repeater 28325

3 2

connection/registration problems??
by Jim Duuuude 14 Sep '12

14 Sep '12

I have been VERY VERY BUSY lately. There seems to have been some sort of amount of people who seem to be having unresolved registration/connection problems. Whoever you are, please email be privately (since there is NO WAY I will have time to sift through list traffic) and I will work with you directly and individually to see what the problems may or may not be. Thanks. Jim WB6NIL

1 0

Using MDC1200 as Telemetry?
by Pyrodox Lion 14 Sep '12

14 Sep '12

Hello, I've got a repeater up and running with a URIx/Asterisk/App_Rpt/ACID combination... I'm getting into features that I wanted to run the setup for now, but I'm new to all the code in Asterisk. I'm wondering if I can do this: Upon receipt of an MDC1200 packet, namely the Unit ID, copy the Unit ID to a variable... Next, as the receiver should be receiving a valid signal and providing the COR signal to the URIx to accept the packet in the first place, and a transmission should be occurring, wait for the transmission to end, and when the COR drops from the receiving radio, encode an MDC1200 packet with the variable of the Unit ID originally set when the system received an MDC1200 packet. I'd like to use this as a type of telemetry, where the repeater will send out the MDC1200 Unit ID of the radio which keyed it on the last transmission upon unkey. I was also wondering if you would be able to keep the system in a non-repeating state, until it received a valid MDC1200 packet. I've gotten the [mdcmacro] clause to issue a COP 2 and take it out of the COP 3 system disabled state... However the system remains enabled and I don't know how to disable it again upon unkey. I've also noticed the MDC Macro will only run the first time a packet is received... Afterwards it simply ignores the MDC Macro whenever it receives a matching packet. Thanks for any help anyone can provide.

2 1

Same Old Problem With Node
by Jim W7RY 13 Sep '12

13 Sep '12

Same old problem. Even after a reboot. Does anyone have any ideas? Thanks 73 Jim W7RY w7ry*CLI> rpt fun 28238 *832560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-3181' -- Hungup 'Zap/pseudo-2135343921' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/ 2560 on IAX2/208.70.77.197:4569-1408 [Sep 6 22:01:40] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect At tempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-1408' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-14719 [Sep 6 22:01:47] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-14719' -- Hungup 'Zap/pseudo-96363512' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-10162 [Sep 6 22:01:53] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-10162' -- rpt (attempt_reconnect) initiating call to IAX2/radio@208.70.77.197:4569/2560 on IAX2/208.70.77.197:4569-2210 [Sep 6 22:02:00] WARNING[2267]: app_rpt.c:17622 attempt_reconnect: Reconnect Attempt to 2560 in process -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-2210' w7ry*CLI>

3 8

Autopatch (inbound) question...
by Bryan D. Boyle 12 Sep '12

12 Sep '12

OK...on another topic...working on getting the autopatch working (yeah, why? Why not...figure dialing in gives me one more way of controlling the machine if not available via RF or I don't have my laptop up to come in thru the web transceiver...) I'm using Google Voice via Simonics.com to handle the SIP registration and such. My box registers fine with the provider...evidenced by the fact that I can dial out...:) However, dialing in from a landline, I get: NOTICE[18486]: chan_sip.c:14418 handle_request_invite: Call from 'GV1609XXXXXXX' to extension '1609XXXXXXX' rejected because extension not found. OK, I'm assuming I need to put an extension for SIP to get routed to. That extension would be inbound, thru, perhaps, a password (or, like when you call Jim, a voice response to type in a code before it rings his line...:)) to connect to the radio control. Thoughts? Insights? -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.

1 0

additionally
by Bryan D. Boyle 11 Sep '12

11 Sep '12

iax.conf file shows the right password, and so forth for all my nodes...however, when I do an iax2 show registry in rasterisk...I get a request sent, but an <unregistered> comment in the Perceived column, and a request sent indication in the state. Jim? (for node 28254...) Thanks. -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.

1 1

not registered on allstarlink?
by Bryan D. Boyle 11 Sep '12

11 Sep '12

hmmmm... reload my rpt.conf file...which hasn't changed a bit...gives me: -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting -- Registered IAX2 to '67.215.233.178', who sees us as 173.161.142.141:4569 with no messages waiting but, in the web transceiver page, for those nodes which I have enabled the transceiver...doesn't show up in the list of active nodes... Hmmm....thoughts? -- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.

1 0

Re: [App_rpt-users] Aprs beacon rate
by ki6ies.tasma＠gmail.com 11 Sep '12

11 Sep '12

Thank you. That worked. I Wonder why the web gui for allstarlink doesn't include that, when you do a download config. But then again it doesn't include alot of things. Ian Ki6ies Sent from my Verizon Wireless 4G LTE DROID Scott Weis <kb2ear(a)kb2ear.net> wrote: >In gps.conf add > > > >interval=600 ; beacon every 10 mins > > > > > >From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of ki6ies.tasma(a)gmail.com >Sent: Monday, September 10, 2012 1:46 PM >To: app_rpt-users(a)ohnosec.org >Subject: [App_rpt-users] Aprs beacon rate > > > >Where can i modify the beacon rate? I couldn't find it in gps.conf. I noticed on aprs.fi my station is beaconing at a rate of 105 times an hour for a fixed station, no gps attached. Thanks. > > > >Ian > >Ki6ies > > > >Sent from my Verizon Wireless 4G LTE DROID >

1 0