July 2014 - App_rpt-users - lists.keekles.org

CuBox-i.. next port?
by pete M 04 Jul '14

04 Jul '14

http://www.solid-run.com/wiki/index.php?title=Main_Page Seen the little gadget and here is the list of the OS it can handle. http://www.solid-run.com/wiki/Category:Distribution Seem a nice little thing to play with.. I am ordering one to be my new xbmc server for the 110 inch 2k-4k projector in the basement.. Think I will get a second one if it run good.

1 0

Re: [App_rpt-users] ACID Capabilities
by mike＠midnighteng.com 04 Jul '14

04 Jul '14

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 65, Issue 8 Trouble Getting Registered
by stephen liggett 04 Jul '14

04 Jul '14

Trouble Getting Registered When I set up a static IP address, my asterisk does not register. When I am in DHCP, it does register, but I cannot receive calls. (I am able to call out to most other nodes). This is my [root@test network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none HWADDR=00:14:22:28:8c:90 ONBOOT=yes DHCP_HOSTNAME=test TYPE=Ethernet IPADDR=192.168.1.30 NETMASK=255.255.255.0 GATEWAY=192.168.1.1 Does anything look wrong with this? The port 4569 is forwarded on the ASIS router. IRLP works fine, BTW (whatever that means!). And I can shell in, ping sites, etc. Or, maybe something else is adrift. Any suggestions would be helpful. steve W3RX On Jul 2, 2014, at 10:43 AM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: Error 1 (Skyler F) > 2. Re: Error 1 (Bob) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 2 Jul 2014 08:29:15 -0600 > From: Skyler F <electricity440(a)gmail.com> > To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Error 1 > Message-ID: > <CAJNyT09jXA+vY5o6OA6g=udZ6Rm5X_zZ=rDtRCZB2ryp5x-H8g(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > I guess it didn't remember the stuff from yesterday, this is all it had > today > > [Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40764 > [Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40930 > [Jul 2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > > > > > > On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm(a)gmail.com> wrote: > >> For sure Asterisk is not happy. A shot... sounds like the computer lost >> your URI/FOB USB address when it lost power. Need to reset using lsusb to >> identify address and reset devstr= parameters in the USB tune file. I?ve >> also had this problem when the network settings are not correct, but would >> bet on the devstr perameters. >> >> >> >> Bob >> >> kk6ecm >> >> >> ------------------------------ >> >> *From:* app_rpt-users-bounces(a)ohnosec.org [mailto: >> app_rpt-users-bounces(a)ohnosec.org] *On Behalf Of *Skyler F >> *Sent:* Tuesday, July 01, 2014 4:15 PM >> *To:* app_rpt-users(a)ohnosec.org >> *Subject:* [App_rpt-users] Error 1 >> >> >> >> I know it is probably on the archive a lot of places, but I am >> experiencing Error 1 sometimes. >> >> >> >> It is sometimes right off the bat when I reboot the system, sometimes not. >> I had it before, and I decided to reinstall from scratch. >> >> >> >> Is there anything i can do about this? The only thing I could think that >> may have led to this is the power cord accidentally coming loose once when >> the computer was on. >> >> >> >> >> >> Asteriscks died with error code 1 >> >> >> >> Automatically restarting >> >> >> >> Asteriscks died with error code 1 >> >> >> >> Automatically restarting >> >> >> >> Asteriscks died with error code 1 >> >> >> >> Automatically restarting >> >> >> >> >> >> >> >> ETC........................ >> >> >> >> >> >> Thnks for any help. >> >> >> >> Skyler Fennell >> >> amsatnet.info >> >> KD?WHB >> >> electricity440(a)gmail.com >> > > > > -- > Skyler Fennell > amsatnet.info > KD?WHB > electricity440(a)gmail.com >

4 3

New IP - node disconnects - Hungup...
by Bob 04 Jul '14

04 Jul '14

Any ideas why a node will keep doing the following? Occurs about ever 2-3 seconds. Then disconnects from the internet about every 15 minutes, reconnecting after a few moments. We just installed a new static IP address... the old one works fine, but is getting disconnected in a day or so. CLI> -- Hungup 'Zap/pseudo-780553757' -- Hungup 'Zap/pseudo-2112596248' -- Hungup 'Zap/pseudo-1679477062' -- Hungup 'Zap/pseudo-817509806' Thanks, Bob kk6ecm

1 0

Problem with audio from portable radio device to phone
by Cristian González Flores 03 Jul '14

03 Jul '14

Hi What is the difference between: .- URI to Simplex Motorola Cable .- URI to Duplex Motorola Cable Because we bought a while ago the first one and we have only audio from Phone-URI-GM300 to Portable radio device and not from Portable radio device to GM300->URI->Phone. The person who programmed the GM300 left him a bridge in the rear port, with that bridge could be heard through the speaker of the GM300 which was spoken in the portable radio device, but to connect the URI was necessary to remove the bridge and place the URICABLE since then not the speaker of the GM300 is heard. Our project is the following, from an IP phone to make a call to a radio. At this time we can call smoothly and through * 99 talk to the radio and heard perfect, however, speaking on the radio cant be heard on the phone. What could be the problem? Please your help and thank you su much in advance.

2 1

parameters in usbradio_tune file
by Bob Roszkowski 02 Jul '14

02 Jul '14

Can someone explain what the parameters rxvoiceadj and rxctcssadj do in usbradio_tune_XXXXX.conf file? Can't seem to find the documentation on it. thanks Sincerely, boB - W5EVH

3 2

Quick follow up on new user help
by Brian Gieryk 02 Jul '14

02 Jul '14

So my node computer will be here next week (maybe saturday) (THANK YOU Dave!) In the interim, working on the radio interface. I have a URI (somewhere) and a Signalink USB. My question is this: Is the Signalink supported by Allstar, or do I need to dig the URI out? Thanks in advance, Brian KE6IYC

3 2

SIP hack attempts
by Robert Newberry 02 Jul '14

02 Jul '14

With help from the list I think I've thwarted the attemps. I've been monitoring the CLI and check /var/log/asterisk/messages things have quite down. I also cleaned out the messages folder. Are there any house keeping task I should also be doing?

1 0

What??
by Jim W7RY 02 Jul '14

02 Jul '14

What is this all about? Spam? 73 Jim W7RY Your membership in the mailing list App_rpt-users has been disabled due to excessive bounces The last bounce received from you was dated 01-Jul-2014. You will not get any more messages from this list until you re-enable your membership. You will receive 3 more reminders like this before your membership in the list is deleted. To re-enable your membership, you can simply respond to this message (leaving the Subject: line intact), or visit the confirmation page at http://ohnosec.org/cgi-bin/mailman/confirm/app_rpt-users/e7beae6492043cf881… You can also visit your membership page at http://ohnosec.org/cgi-bin/mailman/options/app_rpt-users/w7ry%40centurytel.…

2 2

Secret DTMF
by Skyler F 01 Jul '14

01 Jul '14

The repeater site I will be installing allstar node on is part of a club that they want to people to pay a small yearly fee to use their services. Although I am for setting up a free system, they insist that I have some secret DTMF codes instead of the default for the system. The codes I want to change: *3 <node you want to connect to > *1 <node you want to dissconnect to> *71 <dissconnect all> *33 <Echolink node you want to connet to> I want to change the disconnect all to plain *73, *no stars or nothing if that is possible I would like to change the connect to <allstar node> to a *Number *then a ** *for example 4* <allstar to connect to> (I would like to tell yaal the exact number before the star but I don't want to get in trouble) I would like to do similar to above for Echolink and Dissconnect the specific node. Is that all possible and will it work fine? Im still a newbie so could I have help on changing it? -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

3 3