July 2014 - App_rpt-users - lists.keekles.org

Allstar on Ubuntu 12.04
by ronald simpson 10 Jul '14

10 Jul '14

I remember reading a post about someone getting Allstar to run on Ubuntu 12.04. I am having issues compiling zaptel. Linux kernel v3 does not have <linux/autoconf.h> looks like something changed in the headers between v2 and v3 kernel... Any clues or ideas? Sent from Yahoo Mail on Android

3 3

"Official" "fixed" DAHDI patches
by Jim Duuuude 10 Jul '14

10 Jul '14

After much lamenting this morning, I have come up with what I feel comfortable as a "working" DAHDI patch set. This is useful if you are wanting to "roll your own" app_rpt system (perhaps on some non-(Centos 5.X 32 bit) platform). If you take any of the distros of DAHDI 2.5.1 or newer, and apply these patches, it should "work". This patch set may be obtained from: https://allstarlink.org/fixed-dahdi-patches.tar.gz or from SVN at: http://svn.ohnosec.org/viewvc/projects/allstar/astsrc-1.4.23-pre/trunk/fixe…

7 11

XIPAR and using call centric as a trunk..
by Bradley Haney 10 Jul '14

10 Jul '14

Anyone using Callcentric as a trunk.. I have used Callcentric on my acid box and my home PBX for a couple of years and no problem but can’t get call centric to work with XIPAR no matter what settings i put in this is what i get when dialing out[Jul 10 07:14:59] WARNING[14149]: chan_sip.c:13681 handle_response_invite: Received response: "Forbidden" from '"WCRA" <sip:Unknown@callcentric.com>;tag=as6183b17b' localhost*CLI> Any thoughts Bradley

1 0

Firefox for Android ICS on an LG Motion
by Diane Fisher 10 Jul '14

10 Jul '14

Hello. My name is Diane, and I'm from Sacramento. I keep getting a message saying I need a plugin, and sometimes get a message about not having flash capability, and these things happen on the Allstar Links Network website, and all I need is to be able to find my 10-digit access code so I can access the reverse patch or VOIP feature. I use Talkback also for screen-reading purpose for those who are familiar with accessability apps. What plugin might help me find my code, or do I just enter my phone number with area code? Also, if I don't need a plugin for that, I assume I'll still need it if I decide to use the web transceiver. Whatever the case, I looked in Addons and didn't find anything helpful there, so maybe someone here can point me in the right direction on either of my situations. Thank you in advance. I hope I'm

2 1

Run a macro only when all remote links disconnect
by Skyler Fennell 09 Jul '14

09 Jul '14

I have a scenario where I need to run a macro only when every link is disconnected. Lets say 2001 connects, then 2000 connects. If 2001 disconnects but 2000 Is still connected, the macro should not be run. If 2000 then disconnects, there is no more Internet links, and the macro needs to be ran. Is this possible? I really need the machine to play a DTMF sequence(I will just create an audio file to play the sequence unless there is a better way) when there is no more remote links. This is because the repeater I am linking via the input frequency has a command to only have PL follow input and a command for the PL to go back to normal where it has the subduable tone with the long tail and courtesy. I need to turn this command on and off via DTMF based on if there is a connection or not. Sorry for all of the questions I'm asking, it seems like every problem I solve, the radio club needs something else done. 73 Skyler KDØWHB

1 0

List problems
by Jim Duuuude 09 Jul '14

09 Jul '14

YES, we are aware of problems with the current configuration/installation of the server for this list. We are working on it. It will take a few days to do some migrations, changes, and for the "dust to settle" once all this is done. Please have some patience. Jim WB6NIL

1 0

Re: [App_rpt-users] Macro Help
by Doug Crompton 09 Jul '14

09 Jul '14

set duplex=1 in rpt.conf 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Tue, 8 Jul 2014 06:58:27 -0600 Subject: Re: [App_rpt-users] Macro Help From: electricity440(a)gmail.com To: doug(a)crompton.com I just realized that no audio will play when Duplex=0. Telemetry works, but any system audio does not work. Is there a way to fix this? On Mon, Jul 7, 2014 at 10:43 PM, Doug Crompton <doug(a)crompton.com> wrote: First of all there is a way to do that automatically. Put a sound file in /var/lib/asterisk/sounds/rpt/nodenames/ such as 27225.ulaw That file would play when you connected to node 27225. There are already some sample files in there and some groups like the WAN system have file sets you can install for many of their nodes. To just play a sound file locally when you type a DTMF sequence do the following.... In the functions section of your rpt.conf file add the DTMF sequence. Note the DTMF sequence must not conflict with any other commands. 985=localplay,/tmp/some-sound-file This would play the file when you DTMF 985. Note that you do NOT put the extent on the sound file name. No ulaw, gsm etc. and the file must comply with the requirements for playing - sample rate, etc. Another way to execute macro commands and a way I usually employ because it is much more flexible is to use bash scripts in the system and call them to do things. The scripts could also be called from a system cron job setup using crontab. 985=cmd,/tmp/some-script.sh The script could be #! /bin/bash /usr/sbin/asterisk -rx "rpt fun node *327133" /usr/sbin/asterisk -rx "rpt localplay node some-sound-file" Replace node with your node number This would connect your node to node 27133 and play the specified sound file locally. These scripts could go anywhere on the system but I recommend creating a directory under /etc/asterisk - call it local or your call letters or whatever you want and put your local files there. Then if you backup the asterisk directory your local files will be backed up also. Remember you have to make a script you create executable for it to work - chmod 750 filename 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Mon, 7 Jul 2014 16:14:58 -0600 From: electricity440(a)gmail.com To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] Macro Help Im still a bit confused on how to use macros. So lets say I want to execute a command when the DTMF is dialed, lets say just a simple localplay How would I implement that command into a DTMF sequence so I could save it as part of my macro. Lets say I wanted to create a macro to connect to the node 28298 and play the audio file. How would I implement the localplay command in the macros? [mymacros] 1= (localplaycommandHere) *328298 73-- Skyler Fennellamsatnet.info KDØWHBelectricity440(a)gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Skyler Fennellamsatnet.info KDØWHBelectricity440(a)gmail.com

4 4

Event Handler Regex Issue (Bug?)
by k2dls＠arrl.net 08 Jul '14

08 Jul '14

Seems to be an issue with regex processing within the event handler. I am attempting to set a variable called NODE to true based upon the value of the calling node number. I used the sample code found on the Event Management System Drupal page at http://ohnosec.org/drupal/node/176. It fails, throwing a warning as follows if the RPT_LINKS variable contains a "-" character, as in K2DLS-P or any other phone connection: ast_expr2.y:742 op_minus: non-numeric argument Any solutions or suggestions? 73, Dan K2DLS

1 0

2 node system with only wanting echolink on 1 node
by Bradley Haney 08 Jul '14

08 Jul '14

Hello all.. We got a 2 node system on same computer and we would like only to have echolink on 1 of the 2 nodes. I noticed that echolink uses context radio-secure. If i change the context of the node i don't want to have echolink to radio-secure1 and change the extensions to [radio-secure1] withe rpt,1 stuff woudl that work? would each node be able to connect to each other? or would it be better to get a 3rd allstar node number and make that a NON radio hub and tie it together some how that way? Using XIPAR. Bradley

3 4

Re: [App_rpt-users] Error 1
by Skyler F 08 Jul '14

08 Jul '14

I rebooted it and it worked again, I just don't want that happening when my system is permanent and running, it would get annoying having to ssh and reboot (at least restart asterisks) every time that happens, especially if I have to SSH remotely while I am gone. On Mon, Jul 7, 2014 at 8:34 PM, Bob <kk6ecm(a)gmail.com> wrote: > Looks like it is online now, running just fine. > > > ------------------------------ > > *From:* Skyler F [mailto:electricity440@gmail.com] > *Sent:* Monday, July 07, 2014 6:12 PM > > *To:* Bob; app_rpt-users(a)ohnosec.org > *Subject:* Re: [App_rpt-users] Error 1 > > > > My node has been running fine until now, and it just died with error 1. > > > > Here are my messages > > > > [Jul 7 19:10:08] WARNING[8463] acl.c: is not a valid IP > > [Jul 7 19:10:08] WARNING[8463] app_followme.c: No follow me config file > (followme.conf), so no follow me > > [Jul 7 19:10:08] NOTICE[8463] app_queue.c: No call queueing config file > (queues.conf), so no call queues > > [Jul 7 19:10:08] WARNING[8463] cdr_csv.c: unable to load config: cdr.conf > > [Jul 7 19:10:08] NOTICE[8463] chan_agent.c: No agent configuration found > -- agent support disabled > > [Jul 7 19:10:08] NOTICE[8463] pbx_ael.c: Starting AEL load process. > > [Jul 7 19:10:08] NOTICE[8463] pbx_ael.c: AEL load process: calculated > config file name '/etc/asterisk/extensions.ael'. > > [Jul 7 19:10:08] NOTICE[8463] pbx_ael.c: File > /etc/asterisk/extensions.ael not found; AEL declining load > > [Jul 7 19:10:08] NOTICE[8488] app_rpt.c: Normal Repeater Init 40764 > > [Jul 7 19:10:08] WARNING[8493] chan_usbradio.c: Loaded parameters from > usbradio_tune_usb40764.conf for device usb40764 . > > 73 > > KDØWHB > > > > On Wed, Jul 2, 2014 at 12:48 PM, Bob <kk6ecm(a)gmail.com> wrote: > > Yes. I’m using > > > > ... > > power=5 > > height=1 > > gain=3 > > dir=0 > > server1=server1.echolink.org > > server2=servers.echolink.org > > server3=nawest.echolink.org > > server4=backup.echolink.org > > > > #includeifexists custom/echolink.conf > > > > > > It may only use the first three... don’t know. > > > ------------------------------ > > *From:* Skyler Fennell [mailto:electricity440@gmail.com] > *Sent:* Wednesday, July 02, 2014 11:33 AM > *To:* Bob; app_rpt-users(a)ohnosec.org > > > *Subject:* Re: [App_rpt-users] Error 1 > > > > Do I select the server on the echolink conf file? > > > On Jul 2, 2014, at 8:47 AM, "Bob" <kk6ecm(a)gmail.com> wrote: > > I’ve had trouble with server2 for echolink. Recommend deleting and > select another from the list. > > > > Bob > > kk6ecm > > > ------------------------------ > > *From:* app_rpt-users-bounces(a)ohnosec.org [ > mailto:app_rpt-users-bounces@ohnosec.org > <app_rpt-users-bounces(a)ohnosec.org>] *On Behalf Of *Skyler F > *Sent:* Wednesday, July 02, 2014 7:29 AM > *To:* app_rpt-users(a)ohnosec.org > *Subject:* Re: [App_rpt-users] Error 1 > > > > I guess it didn't remember the stuff from yesterday, this is all it had > today > > [Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40764 > [Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40930 > [Jul 2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > > > > > On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm(a)gmail.com> wrote: > > For sure Asterisk is not happy. A shot... sounds like the computer lost > your URI/FOB USB address when it lost power. Need to reset using lsusb to > identify address and reset devstr= parameters in the USB tune file. I’ve > also had this problem when the network settings are not correct, but would > bet on the devstr perameters. > > > > Bob > > kk6ecm > > > ------------------------------ > > *From:* app_rpt-users-bounces(a)ohnosec.org [mailto: > app_rpt-users-bounces(a)ohnosec.org] *On Behalf Of *Skyler F > *Sent:* Tuesday, July 01, 2014 4:15 PM > *To:* app_rpt-users(a)ohnosec.org > *Subject:* [App_rpt-users] Error 1 > > > > I know it is probably on the archive a lot of places, but I am > experiencing Error 1 sometimes. > > > > It is sometimes right off the bat when I reboot the system, sometimes not. > I had it before, and I decided to reinstall from scratch. > > > > Is there anything i can do about this? The only thing I could think that > may have led to this is the power cord accidentally coming loose once when > the computer was on. > > > > > > Asteriscks died with error code 1 > > > > Automatically restarting > > > > Asteriscks died with error code 1 > > > > Automatically restarting > > > > Asteriscks died with error code 1 > > > > Automatically restarting > > > > > > > > ETC........................ > > > > > > Thnks for any help. > > > > Skyler Fennell > > amsatnet.info > > KDØWHB > > electricity440(a)gmail.com > > > > > -- > > Skyler Fennell > > amsatnet.info > > KDØWHB > > electricity440(a)gmail.com > > > > > > -- > > Skyler Fennell > > amsatnet.info > > KDØWHB > > electricity440(a)gmail.com > -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

1 0