October 2015 - App_rpt-users - lists.keekles.org

Beagle/LOX "guinea pig" needed
by Jim Duuuude 26 Oct '15

26 Oct '15

Is there someone with a Beagleboard xM/LOX board (and radio that is tuned up and working, etc), sitting in front of them where there is complete and easy access (not up on a hill), that could help us test something?? Thanks. Jim, WB6NIL

2 1

Asterisk suddenly failing
by Loren Tedford 25 Oct '15

25 Oct '15

Today i had no idea but asterisk had stopped here is some sample error messages that i found that could be useful.. [Oct 25 18:20:56] NOTICE[17132] app_rpt.c: Normal Repeater Init 29925 [Oct 25 18:20:56] NOTICE[17132] app_rpt.c: Normal Repeater Init 40875 [Oct 25 18:20:56] WARNING[17152] chan_usbradio.c: Loaded parameters from usbradio_tune_usb29925.conf for device usb29925 . [Oct 25 18:20:56] WARNING[17149] chan_usbradio.c: Possibly stuck USB read channel. [usb29925] [Oct 25 18:20:56] WARNING[17149] chan_usbradio.c: Nope, USB read channel [usb29925] wasn't stuck after all. I am still trying to figure out what caused the repeater to fail. Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Main Line:1-631-686-8878 Option 1 for Loren. Fax Line 1:1-618-551-2755 Fax Line 2:1-631-686-8892 (New Fax line) Cell: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

1 0

Rasp-Pi !! img
by Russ WL7LP 25 Oct '15

25 Oct '15

I have downloaded the Rasp-Pi 2 img. it installed 4 times just fine.however, I can not connect it to anything there seems to be nothingin asterisk -R once in the CLI prompt doing a ? mark products nothingno menu at all. has something changed to connect a node from the CLI command prompt? 73 Russ WL7LP Alaska Morning Net - Net Manager IRLP node 7369

3 4

information node status not available
by ea8ee 25 Oct '15

25 Oct '15

I changed the hard drive of my computer now I see that my node dont sends information to the status page, I think the time of the computer isnt udated now but can someone suggest me how to send update status information Enviado con MailTrack <https://mailtrack.io/install?source=signature&lang=es&referral=ea8ee1@gmail…> [image: logo] *Jose Manuel Martinez* *EA8EE* Whatsapp: +34692112495 | Telegram :@ea8ee | +967961389 <fax:+967961389> | C/pelota,21-2C-35001-Las Palmas--Spain | ea8ee(a)me.com | http://www.radioclubfaycanes.es | Skype: ea8ee1 <#> | ea8ee | ED8ZAB-R XRF007B <http://plus.google.com/ea8ee1> <http://www.facebook.com/groups/dstar.spain/> Radionoticias Vídeo del Alinco DR-B185HE <http://feedproxy.google.com/~r/Radio-Noticias/~3/5tkL7SWLwOs/video-del-alin…> Latest Tweet: <https://twitter.com/ea8ee> #echolink <https://twitter.com/echolink> #dstar <https://twitter.com/dstar> #irlp <https://twitter.com/irlp> #allstarlink <https://twitter.com/allstarlink> domingo de 18 de Octubre a las 14h utc Conf EA8SPAIN Las Comunicaciones aeronauticas EA1ITC Francesc Read More <https://twitter.com/ea8ee/statuses/653965616676765696> <https://twitter.com/ea8ee> ✔ Get a Signature like this: Click Here! <http://ws-promos.appspot.com/r?rdata=eyJydXJsIjogImh0dHA6Ly93d3cud2lzZXN0YW…>

1 0

(no subject)
by ea8ee 25 Oct '15

25 Oct '15

I changed the hard drive of my computer now I see that my node dont sends information to the status page, I think the time of the computer isnt udated now but can someone suggest me how to send update status information [image: logo] *Jose Manuel Martinez* *EA8EE* Whatsapp: +34692112495 | Telegram :@ea8ee | +967961389 <fax:+967961389> | C/pelota,21-2C-35001-Las Palmas--Spain | ea8ee(a)me.com | http://www.radioclubfaycanes.es | Skype: ea8ee1 <#> | ea8ee | ED8ZAB-R XRF007B <http://plus.google.com/ea8ee1> <http://www.facebook.com/groups/dstar.spain/> Radionoticias Vídeo del Alinco DR-B185HE <http://feedproxy.google.com/~r/Radio-Noticias/~3/5tkL7SWLwOs/video-del-alin…> Latest Tweet: <https://twitter.com/ea8ee> #echolink <https://twitter.com/echolink> #dstar <https://twitter.com/dstar> #irlp <https://twitter.com/irlp> #allstarlink <https://twitter.com/allstarlink> domingo de 18 de Octubre a las 14h utc Conf EA8SPAIN Las Comunicaciones aeronauticas EA1ITC Francesc Read More <https://twitter.com/ea8ee/statuses/653965616676765696> <https://twitter.com/ea8ee> ✔ Get a Signature like this: Click Here! <http://ws-promos.appspot.com/r?rdata=eyJydXJsIjogImh0dHA6Ly93d3cud2lzZXN0YW…> Enviado con MailTrack <https://mailtrack.io/install?source=signature&lang=es&referral=ea8ee1@gmail…>

1 0

Re: [App_rpt-users] Asterisk DIAL error message (resolved)
by K Yoksh 25 Oct '15

25 Oct '15

This issue has been resolved. It turned out to be a SIP DOS attack to the other node. I'm not sure why he was able to connect to nodes besides mine. I have noticed multiple app_rpt boxes that have SIP enabled being attacked by Amsterdam IPs. 188.138.74.76 and 188.138.74.90 are two that come to mind. We've reported the abuse to the ISP (RIPE), but I'm not holding my breath.. 73 --- Original Message --- Kyle, Does the other node have a problem connecting to nodes other then yours? Does the other node have problems with incoming connections? What are the node numbers involved? Check the system date and time on both nodes. 73, Steve N4IRS On 10/24/2015 01:36 PM, K Yoksh wrote: >>* Hi all, *>>* I recently converted one of my boxes from ACID to DIAL, and have run *>* into this issue... When a particular node tries to connect to me (or *>* vice-versa), I hear a 'connection failed' message, and see the *>* following in my logs: (note I've replaced the actual IP with IP ADDRESS: *>>* chan_iax2.c: Address [IP ADDRESS] failed CallToken hash inspection *>>* I did make sure that the node's IP in rpt_extnodes matches the IP of *>* the remote node. Other stations can connect to me, and vice-versa. *>>* Any ideas? *>>* Thanks. 73 *>>* Kyle Yoksh *>* K0KN *>* Olathe, KS *>* Allstar 2210-2219*

1 0

RPI2 Dial No Boot
by Chris Perrine (KB2FAF) 24 Oct '15

24 Oct '15

Is anyone else having trouble getting the rpi2_dial img to boot? I know how to format sd cards for use with the pi etc etc etc... Chris KB2FAF

3 2

Asterisk DIAL error message
by K Yoksh 24 Oct '15

24 Oct '15

Hi all, I recently converted one of my boxes from ACID to DIAL, and have run into this issue... When a particular node tries to connect to me (or vice-versa), I hear a 'connection failed' message, and see the following in my logs: (note I've replaced the actual IP with IP ADDRESS: chan_iax2.c: Address [IP ADDRESS] failed CallToken hash inspection I did make sure that the node's IP in rpt_extnodes matches the IP of the remote node. Other stations can connect to me, and vice-versa. Any ideas? Thanks. 73 Kyle Yoksh K0KN Olathe, KS Allstar 2210-2219

2 1

New AllStar install using DIAL - help needed
by Larry da Ponte 24 Oct '15

24 Oct '15

Hello AllStar users - I'm having poor luck getting an AllStar node on the air. I have a registration number, server and node set up on the web site, and have tried ACID, DIAL, and now DIAL for RPi. I'm using a DMK Engineering URI USB interface cable and a Motorola mobile UHF radio that was working fine with IRLP and Echolink. The problem I'm having with DIAL is that there are no configuration scripts that line up with the documentation that people have written for setting up a new AllStar node. I have what I think are a correctly setup set of asterisk scripts but my node will not show up on the http://stats.allstarlink.org/ on-line nodes page. My node # is 42372. I'm in the CET time zone here in northern Switzerland - is there anyone who would be willing to kill an hour or two with me over Skype to troubleshoot the issue? I have two computers that I could use - one is a fanless brick based on an intel mobile processor and the other is an RPi 2 - I don't really care which one we get going. I have some experience with IRLP and Echolink and have written some custom batch scripts to enhance the nodes so no my way somewhat around Linux. Thanks 73 Larry HB9EYQ

2 2

K8055 from velleeman
by K Yoksh 23 Oct '15

23 Oct '15

Hi Pete, I have played around with a K8055 in Linux, and can operate it via the command line or script, etc. As a matter of fact, I have a few unbuilt kits, new in the box if anyone is interested... :-) 73, Kyle Yoksh K0KN Olathe, KS Allstar 2210-2219 --- Original Message --- anyone used a Velleman K8055 on an allstar syte?? Got this here for the last 5 years or so, got it to play a bit with usb stuff.. Now that the playing is done I would like to know if it could be of some uses. here is the link to what I am talking about: https://www.velleman.eu/products/view/?id=351346 this could be usefull in case we need to reset something remotely while we are connected in ssh to the allstar machine.. or we could automate the rebooting of a router if we loose some connectivity? I for one would put one out put on my msf5000 reset switch.. that way I would not have to go to the repeater site every 5 or 6 months to reste it cause the rx vco is unlocked for no damn reason..

2 1