October 2015 - App_rpt-users - lists.keekles.org

Android IAX client for AllStar
by Steve Zingman 26 Dec '15

26 Dec '15

New version to test: Add connected node to number status screen. Mute transmitted audio while PTT not asserted. (This will work with nodes setup for VOX) Added exit to option menu. Slight change to keypad. Added keys A B C D. Version 1.6 We have built a early beta version of a Android IAXRPT Client. This is a simple Android app that will connect with a AllStar Asterisk node. Think IAXRPT for Android. It has a PTT button! <https://www.dropbox.com/s/3ey9u0tvtdedgh4/AndroVoIP.apk?dl=0> This is a early build. There are a lot of feature to add and I'm sure bugs. The client only supports ulaw at this time. For backspace use the virtual keyboard. Press Send to send commands and node numbers. There is only one account supported. To create an account, tap the Account button, Tap IAX2 No Account defined to open the account dialog. Hostname: FQDN or IP address of the server. Port: UDP default is 4569 Username: matching iax.conf stanza Password: matching iax.conf stanza CallerID: this can be displayed in Allmon and the AllStar node status page. Caller Number: not used yet. Save: Press to save account information. Press back button to go to main screen. Enter node number and press send. PTT bar will be white while connected to node red whie transmitting. See<https://github.com/N4IRS/AllStar/blob/master/configs/iax.conf> for iaxclient stanza See <https://github.com/N4IRS/AllStar/blob/master/configs/extensions.conf> for iax-client stanza Feel free to download and try out. Please report bugs and feature to me. I will also be happy to answer questions here on the list. 73, Steve N4IRS -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

2 1

Dial vs ACID
by Jamey Wright 12 Dec '15

12 Dec '15

I have a couple of systems running ACID. Is there any compelling reason to upgrade them to DIAL? I don't have any issues with them at the moment and I have some other things I'd rather be doing. Thanks Jamey WR4JW

12 27

Registration issues
by Thor Wiegman 30 Nov '15

30 Nov '15

Tonight I had a user tell me that one of my nodes wouldn't connect anywhere. Verified, rebooted the server, still nothing. Tried running the rc.updatenodelist script manually and it just sits there. However, after running the following command I do get an update and can now connect to other nodes. /usr/bin/wget -O /var/lib/asterisk/rpt_extnodeshttp://nodes1.allstarlink.org/cgi-bin/nodes.pl When I checked two other nodes they had the same problem and same work-around. I ran that same command for nodes2 and it works. When I run it for nodes3 it times out. Could a problem with nodes3.allstarlink.org be causing the rc.updatenodelist script to choke? And could that have been causing my nodes to not be able to connect to others?

5 5

DIAL distro now available for RPi2
by Jim Duuuude 09 Nov '15

09 Nov '15

The DIAL distro for Allstar is now available for the Raspberry Pi 2 at: http://dl.allstarlink.org/dial/rpi2_dial.img It has basically the same contents as the x86 DIAL distro, but runs on an RPi2. It is approx 2GB in size, and will function on any SD card 2GB or larger (for larger cards, an option is provided for expanding the root partition to the full size of the card). Jim, WB6NIL

5 6

Having issues with allstar locking up and crasshing
by Loren Tedford 31 Oct '15

31 Oct '15

Now the data center has issues.. [Oct 31 09:52:59] NOTICE[26385] cdr.c: CDR simple logging enabled. [Oct 31 09:52:59] NOTICE[26385] loader.c: 55 modules will be loaded. [Oct 31 09:52:59] WARNING[26385] chan_iax2.c: Unable to open IAX timing interface: No such file or directory [Oct 31 09:52:59] WARNING[26385] acl.c: is not a valid IP [Oct 31 09:52:59] ERROR[26385] codec_dahdi.c: Failed to open /dev/dahdi/transcode: No such file or directory [Oct 31 09:52:59] NOTICE[26392] app_rpt.c: Normal Repeater Init 41715 [Oct 31 09:52:59] NOTICE[26392] app_rpt.c: Normal Repeater Init 27103 [Oct 31 09:52:59] NOTICE[26392] app_rpt.c: Normal Repeater Init 29593 [Oct 31 09:52:59] NOTICE[26392] app_rpt.c: Normal Repeater Init 41834 Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com Main Line:1-631-686-8878 Option 1 for Loren. Fax Line 1:1-618-551-2755 Fax Line 2:1-631-686-8892 (New Fax line) Cell: 618-553-0806 http://www.lorentedford.com http://www.kc9zhv.com http://hub.kc9zhv.com

2 2

AllStarLink Stops und never starts again
by Torben Klimt 31 Oct '15

31 Oct '15

Hi all, since yesterday my repeater is dead :( This is a screenshot of the error. Any ideas ? Greetings an 73 de torben dh6mbt [cid:image001.png@01D113C7.886D5020]

1 0

Jeremy W0JRL's Image
by Skyler F 31 Oct '15

31 Oct '15

Hi Everyone, There is a great image for the Raspberry pi that nobody really knows about. This is built by a really smart individual who is completely blind. It supports WiFi, and doesn't require port forwarding on specific routers. This image is built on Raspbian, and has been bug tested to a large extent. http://jlappliedtechnologies.com/2015/10/14/all-star-raspbian-image/ Jeremy has spent a LOT of work on this image, and will not continue support unless people use it. KD0WHB

2 1

Pi2 GPIO???
by K Yoksh 30 Oct '15

30 Oct '15

Ok, I wasn't sure... If you need a beta tester, I'll be glad to help! :-) I'm planning on making a cable from GPIO to my homebrew parallel port interface box... I haven't researched the Pi2 GPIO, but assumed it would be TTL logic? That'd make it super easy to go from parallel to GPIO... 73 --- Original Message --- Tim was referring to GPIO on the CM1xx. That being said, Mike and I are starting to talk about GPIO on the RPi2 73, Steve N4IRS On 10/30/2015 12:08 PM, K Yoksh wrote: > >* I'm looking forward to using my Pi nodes with GPIO for PTT/COS, but I* >* thought GPIO wasn't supported until the next release?* > > *73* > >*Kyle* >*K0KN* >* Olathe, KS *

2 1

Pi2 GPIO???
by K Yoksh 30 Oct '15

30 Oct '15

I'm looking forward to using my Pi nodes with GPIO for PTT/COS, but I thought GPIO wasn't supported until the next release? 73 Kyle K0KN Olathe, KS --- Original Message --- Date: Thu, 29 Oct 2015 10:25:28 -0700 From: Tim Sawyer <tisawyer at gmail.com <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> To: Steve N4IRS <szingman at msgstor.com <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> Cc: "app_rpt-users at ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>" <app_rpt-users at ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> Subject: Re: [App_rpt-users] DIAL simpleusb Message-ID: <CAG3ht9uW80TNGu9BGZghqGg3FozagJ_dmrwJFA3Ygo5XjzmhAg at mail.gmail.com <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> Content-Type: text/plain; charset="utf-8" Working fine including GPIO. On Thursday, October 29, 2015, Steve N4IRS <szingman at msgstor.com <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> wrote: >* Yes, *>* No errors reported. *> >* > Has anyone tested the simpleusb driver with the RPi2 version of DIAL? *> >* -- *

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 80, Issue 104
by Mark DuMoulin ＠ WB2ERS 30 Oct '15

30 Oct '15

Yes please sign me up. User: wb2ers Password: wb2ers I assume I can change the password once I have a login Mark DuMoulin WB2ERS Wb2ers(a)metcom.com C 800-410-3130 -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request(a)ohnosec.org Sent: Thursday, October 29, 2015 8:38 PM To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 80, Issue 104 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: DIAL Question (Corey Dean) 2. Re: DIAL simpleusb (Tim Sawyer) 3. Re: UIR Startup (Mark DuMoulin @ WB2ERS) 4. Re: UIR Startup (Steve N4IRS) 5. Re: AMBE question (Bryan Fields) 6. Re: AMBE question (ronald simpson) ---------------------------------------------------------------------- Message: 1 Date: Thu, 29 Oct 2015 12:18:58 -0400 From: Corey Dean <n3fe(a)repeater.net> To: David McGough <kb4fxc(a)inttek.net> Cc: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] DIAL Question Message-ID: <D3C84F7B-CF9A-4B21-A85C-E92319C8BEB3(a)repeater.net> Content-Type: text/plain; charset=us-ascii Yes! I ran it that way with an r100 for a few weeks before moving it over to the msf5000. I had no issues running simpleusb and usbradio. I don't have any of the cracks or pops anywhere that you are referring to running usbradio. I do know what you are talking about but I have never experienced that on any of my equipment. Sent from my iPhone > On Oct 29, 2015, at 10:14 AM, David McGough <kb4fxc(a)inttek.net> wrote: > > > Has anyone tested the simpleusb driver with the RPi2 version of DIAL? > > >> On Thu, 29 Oct 2015, Corey Dean wrote: >> >> I thought I had replied to everyone and I noticed I only replied to Neil. I have been running the Debian rpi2 image for quite a while. Way back when Steve first created it. I run it in full duplex mode using usbradio on an msf5000 with no issues at all. >> >> I know what you are talking about with the echo issue. That seems to just be a problem on the arch image on the hamvoip site as that is the only place I have heard it. I did try that image long and and having audio delays at almost 10 seconds and time just made it unusable. That was even using simpleusb. No problems running usbradio and dsp on the Debian image. >> >> To make a long story short, the Debian image just works! No have had zero issues with it. >> >> Corey N3FE >> >> Sent from my iPhone >> >>> On Oct 29, 2015, at 8:46 AM, Jon Rorke <jrorke(a)cogeco.ca> wrote: >>> >>> I have been playing with the full duplex mode using DSP decode (PL, carrier squelch) in and out on the RPI2 with DIAL and so far it seems to be on par with what Acid does on a PC. >>> >>> There is some latency due to audio processing but its about 200 to 250 ms and seems to be stable. I have never seen an acid box with 0 latency on the full duplex audio. >>> >>> In may opinion it woks just as well as an ACID set up on a pc for a single full duplex repeater node. >>> >>> Can;t speak to the other questions though. >>> >>> Jon VA3RQ >>> >>>> On 10/28/2015 5:48 PM, Neil k8it wrote: >>>> I have been waiting a bit before I start playing with DIAL on a RPI2. >>>> I still have two questions >>>> 1. Does the RPI2 DIAL version solve the tx echo buffer issue that the current version of Asterisk RPI2 code has. The fix to this issue seems to be taking a long time. >>>> 2. Some users have reorted that a lot of modules have been disabled, such as the Echolink channel driver and others. >>>> 3. With the new Mini-DV4 dongle $125 and the amount of >>>> capability, has anybody wrote a channel driver to tie the Yaesu >>>> Fusion Wires-X network into DIAL. It appears that most of the >>>> documentation is out there, we just need someone to write the >>>> channel driver >>>> >>>> >>>> Thanks >>>> 73 Neil Sablatzky K8IT >>>> Allstar Node 41838 KITLINK >>>> Allstar Node 42087 KITLINK HUB >>>> IRLP Node exp0068 >>>> Echolink K8IT-L >>>> WIRES-X K8IT 11479 Room 21479 >>>> >>>> From: Steve N4IRS >>>> Sent: Tuesday, October 27, 2015 10:35 AM >>>> To: N7MTC . ; app_rpt-users(a)ohnosec.org >>>> Subject: Re: [App_rpt-users] Procedure for loading DIAL on a R-Pi2 >>>> or a PC >>>> >>>> Mac, >>>> The RPi2 install is pretty much download the image, burn it to SD card,. >>>> Once the Pi boots, you can login on the HDMI / USB console, or SSH into the board on port 222. >>>> The board is setup for DHCP so check your DHCP (router) server for address. >>>> If you want, you can login via the built in serial port at 115,200 >>>> System will walk you through setup. >>>> >>>> FAQ for DIAL is at: >>>> <http://docs.allstarlink.org/drupal/node/170> >>>> >>>> 73, Steve N4IRS >>>> >>>> >>>>> On 10/27/2015 10:20 AM, N7MTC . wrote: >>>>> Is there a procedure for loading the "new" DIAL version of asterisk for Raspberry pi2? >>>>> >>>>> I am looking to connect either a Pi2 or an intel NUC to a Yaesu Dr-1x using the Arcom RC-210 and the Arcom ADR. I noticed DIAL has replaced ACID as the latest flavor of asterisk for both PC and PI2. I have not found any install write-ups or YouTubes showing a DIAL install. >>>>> >>>>> Regardless of which platform I will need to use an USB to Serial adapter to connect the ALLSTAR node to the repeater controller. It will be of the FTDI chipset either a trendnet Tu-s9 or a GearMo USB RS-232. >>>>> >>>>> >>>>> /73 >>>>> Mac, N7MTC >>>>> >>>>> >>>>> Benjamin Franklin - "Those who surrender freedom for security will not have, nor do they deserve, either one." >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)ohnosec.org >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>>> >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)ohnosec.org >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>>> No virus found in this message. >>>> Checked by AVG - www.avg.com >>>> Version: 2015.0.6173 / Virus Database: 4455/10900 - Release Date: >>>> 10/27/15 >>>> >>>> >>>> >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)ohnosec.org >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > ------------------------------ Message: 2 Date: Thu, 29 Oct 2015 10:25:28 -0700 From: Tim Sawyer <tisawyer(a)gmail.com> To: Steve N4IRS <szingman(a)msgstor.com> Cc: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: Re: [App_rpt-users] DIAL simpleusb Message-ID: <CAG3ht9uW80TNGu9BGZghqGg3FozagJ_dmrwJFA3Ygo5XjzmhAg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Working fine including GPIO. On Thursday, October 29, 2015, Steve N4IRS <szingman(a)msgstor.com> wrote: > Yes, > No errors reported. > > > Has anyone tested the simpleusb driver with the RPi2 version of DIAL? > > -- > ,,, > (o o) > -----ooO-(_)-Ooo------ > --- N4IRS was Here --- > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll > down to the bottom of the page. Enter your email address and press the > "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message > to the list detailing the problem. -- -- Tim

1 0