- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Anyone have any ideas?
by kk6ecm 18 Oct '13

18 Oct '13

Check to see if the Beagle boots off the original SD card; Checking if it is a hardware or software issue. Bob KK6ECM On Oct 18, 2013, at 9:00 AM, app_rpt-users-request(a)ohnosec.org wrote: > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 18 Oct 2013 20:56:49 +1100 > From: "R.K." <vk3ant(a)optusnet.com.au> > To: <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] Anyone have any idea ? > Message-ID: <832C603E74CB4C1EB920F9C2E13C92A5@RKPC> > Content-Type: text/plain; charset="utf-8" > > > Hi group, > > Been trying to set up my Beagle/LOX combo but have been having some issues. > > Anyway, been accessing it via a serial cable and PuTTY, been playing with the config, nodesetup and everything has been going as well as it could, until I shut it down one night, got up the next morning with a fresh mind, fired up the gear, plugged in the serial cable, clicked on server, download config, initiate in the Portal and the response I got was ? Sorry, your server does not have any downloadable nodes ( Register Only ) ? > > Does anyone understand what this message is, why am I getting it. Didn?t think that whatever parameters I put in the Portal and downloaded to the Beagle would corrupt it, so why is it now telling me I have no downloadable nodes, I don?t understand, I have had no problems for the past year that I have been playing with this thing. > > To make matters worse, I can?t log in to my Beagle with PuTTY either, I enter the Com port and baud rate and all I get is a blank screen, can do nothing with it so I guess this also has something to do with me not being able to configure my Beagle through the Portal. > > Anyone got any thoughts please. > > Thanks. > Ron > VK3ANT >

5 4

Re : Static IP
by pete M 18 Oct '13

18 Oct '13

Need ro fix resolv.conf http://www.dnsknowledge.com/q-a/howto-edit-etcresolv-conf-file-in-centos/ --- Message initial --- De : "Richard Szajkowski" <va3rzs(a)gmail.com> Envoyé : 18 octobre 2013 13:14 A : "app rpt-users" <app_rpt-users(a)ohnosec.org> Objet : [App_rpt-users] Static IP Ok having a problem with static IP I set it via set up , rebooted the system Did a ifconfig and I see the right info But for some reason I can't get to the outside world Some one said I needed to do a DNS update , I can't find that info, Thanks for all your help Richard Szajkowski _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

DNS/minicomm
by Richard Szajkowski 18 Oct '13

18 Oct '13

Found a fix thanks Dhclient worked great Found the problem when I wanted to install minicomm but after I fixed it says there is no mini comm available I want to be able to program my controller (old RLC2a) form the allstar box Any help would be great Richard Szajkowski

2 1

Anyone have any idea ?
by R.K. 18 Oct '13

18 Oct '13

Hi group, Been trying to set up my Beagle/LOX combo but have been having some issues. Anyway, been accessing it via a serial cable and PuTTY, been playing with the config, nodesetup and everything has been going as well as it could, until I shut it down one night, got up the next morning with a fresh mind, fired up the gear, plugged in the serial cable, clicked on server, download config, initiate in the Portal and the response I got was “ Sorry, your server does not have any downloadable nodes ( Register Only ) “ Does anyone understand what this message is, why am I getting it. Didn’t think that whatever parameters I put in the Portal and downloaded to the Beagle would corrupt it, so why is it now telling me I have no downloadable nodes, I don’t understand, I have had no problems for the past year that I have been playing with this thing. To make matters worse, I can’t log in to my Beagle with PuTTY either, I enter the Com port and baud rate and all I get is a blank screen, can do nothing with it so I guess this also has something to do with me not being able to configure my Beagle through the Portal. Anyone got any thoughts please. Thanks. Ron VK3ANT

1 0

Nodenames repository
by Lu Vencl 18 Oct '13

18 Oct '13

Anyone have the information on where one can deposit custom node names so other nodes can download them? I recall seeing an email or information, but I have lost it over 2 years ago. Thanks! Lu, KA4EPS node 27892

6 5

Re: [App_rpt-users] Got my uri
by Richard Szajkowski 17 Oct '13

17 Oct '13

Thank you nano looks like what I used to use , did not like vi , So I think I have every thing set up , the green light on the uri is blinking , red light is not I see the node on the web portal (27155) Can some on try and connect , I think I have every thing set up correct , today I will be building a cable to go to my RLC2a controller , then I can set levels I am thinking for the cable an old printer cable with one end chopped off should work What have you used ?? Richard Szajkowski > On Oct 16, 2013, at 2:55 PM, Johnny Keeker <cypresstower(a)yahoo.com> wrote: > > I like vi but for basic allstar configurations try nano > [root@test~]nano /etc/asterisk/rpt.conf > > From: Richard Szajkowski <va3rzs(a)gmail.com> > To: > Cc: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > Sent: Wednesday, October 16, 2013 1:21 PM > Subject: [App_rpt-users] Got my uri > > Got my uri today , plugged it in the green led lights up and flashes > > Is there a doc on what to do now ? > > I see I have mail , tried to read it with pine , but the box says not such command or file > > Tried to look at some files but pico is not there > > What programs are there to use ?? > > Thanks for any help here , I guess just a couple steps to get this in basic running mode > > > Richard Szajkowski va3rzs > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

1 0

BeagleBone Black and URI
by J.J. Boyd 16 Oct '13

16 Oct '13

Anyone tried to install asterisk and app_rpt onto a beaglebone black? I would like to use a beaglebone black and a URI with chan_simpleusb.c as a controller. Was going to take a stab at it and thought if someone else has already made this journey and could lend some advice that would be nice :) KG4VCF -- J.J. Boyd

2 1

Re: [App_rpt-users] allstar control
by Russ WL7LP 16 Oct '13

16 Oct '13

I personally think that the blocking subject is a good question. I see it asked here from time to time. but no real answer to it. I am new to allstar and I'm still learning about it. so the question interest me since I am a net controller for a local net. being able to disconnect a node because of interference or keyed up without audio etc, would be of great value to know. whether it be posted here or through a private email. 73 Russ WL7LP -------------------------------------------- On Tue, 10/15/13, Johnny Keeker <cypresstower(a)yahoo.com> wrote: Subject: Re: [App_rpt-users] allstar control To: "Harry Romano" <hromano(a)earthlink.net>, "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Date: Tuesday, October 15, 2013, 6:36 PM There are many out here that want to help although block nodes does not seem to be a popular subject. If your adamant about blocking, why not consider a Private Allstar System ..... JK From: Harry Romano <hromano(a)earthlink.net> To: app_rpt-users(a)ohnosec.org Sent: Tuesday, October 15, 2013 10:21 PM Subject: [App_rpt-users] allstar control Hello All, I did get the node working thanks for all the help. Is there any way to control who connects to your system? Is there any way to block people from your system? Harry KC4RPP _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -----Inline Attachment Follows----- _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

9 8

Help getting my node back up and running
by Larry Ellsworth - K6KUS 16 Oct '13

16 Oct '13

Hello all. I have just got my node back up and running. Had a few things happen.. One the repeater dies a horriable death.. second the puter went up with it. So.. Now I have an msf5000 and a new puter. I have the software installed and the URI plugged in. Now what I need help with is getting it connected to the MSF and configuring the software to get it all working again. Any help I would be greatful for. Thanks. Larry Ellsworth K6KUS Irlp Node 7413 Echolink Node 524805 Allstar Link 27775

1 0

Re: [App_rpt-users] USING own SIP for AUTO PATCH
by Bradley Haney 16 Oct '13

16 Oct '13

Got it to work!!! email me direct with any questions. Last piece of the puzzle trying to figure out how to announce on the machine that the "telephone portal is connected" I got it to announce on the phone side but not on the repeater. would would be the correct extensions.conf string to get something to play on the repeater? is it filename/rpt/nodenumer? Bradley kc9gqr kc9gqr(a)mtco.com

2 1