- App_rpt-users - lists.keekles.org

Reading pleasure
by Bryan D. Boyle 11 May '13

11 May '13

I know this will probably cause the 'it's not in the charter' types to get all jiggly...so I beg your indulgence ahead of time...but was reminded by a colleague who was at UIUC in the day...well, it's only 20 years old...and here's the the page that's considered the starting point: http://info.cern.ch/hypertext/WWW/TheProject.html And we're still waiting for those millions of simian creatures in back of keyboards to produce a Shakespearian play, right? Enjoy, gentlemen. Bryan

1 0

Re: [App_rpt-users] Ubiquiti Equipment
by N7LD＠aol.com 11 May '13

11 May '13

We have had great luck with them. Our current system we go from the ground to hill A (22 miles). From there to hill B (60 miles). Then to hill C (39 miles) then to hill D (120 miles). Signal on hill D is -49 We have had no issues and they have been running several years. Lee In a message dated 5/10/2013 10:59:13 A.M. Pacific Daylight Time, david.osborn(a)manx.net writes: Hi Gang, In recent messages, Ubiquiti equipment has been mentioned for links. I was wondering how it stacks-up in terms of keeping out / withstanding the weather. I have an application in mind for an AllStar node and it will be on a wild hilltop with nasty weather (very). The path I have in mind is just under 10 miles, clear line-of-sight. Can any of the ubiquiti stuff stand a bit of a weather bashing and, if so, which items have been found best? David GD4HOZ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Re: [App_rpt-users] Was GM300
by Steve Agee 10 May '13

10 May '13

Everyone stand by while I drag out my rotary dial Princess telephone, complete with self igniting Ault wall wart! N5ZUA ========================================= Wow.. Im sooo inspired... Perhaps I should add dial-pulse signalling to the app_rpt stuff. Can you imagine how interesting it would be on a mobile station in a fringe coverage area?? :-)

3 2

Re: [App_rpt-users] Ubiquiti Equipment
by Mark Cheavens 10 May '13

10 May '13

I have two back to back point to point links in Colorado at a location that gets 200+ inches of snow per year. Each end point has commercial power available, but the back to back point is a total solar site. That system was using Motorola Canopies for 10+ years. Two years ago I replace all the equipment with 5g (lower gain) dish nanobridges. All four radio's have radomes on them to keep the snow out of the dishes. (One of them has significant up-tilt). I get 150Mb of throughput with an average latency of 7ms. (The Canopies were 60ms and 10Mb) As a HUGE plus my power budget went from a 10 day no sun reserve to a 25 day no sun reserve. (Batteries fully recharge in 2 days of full sun). - With my old system I averaged one outage every other year in the winter for 2-3 days (Late December or early January when the days are short and the weather bad). - I have not gone below 50% in the last two years. I have installed more of them in "easy" non-harsh areas as well. Mark KC5EVE At 02:51 PM 5/10/2013, Corey Dean wrote: >I know of a shot at 13 miles with very decent signal levels that has >been up for 2 years using nano bridges with no problems. > >Corey N3FE >________________________________________ >From: Jeff Carrier [k0jsc.jeff(a)gmail.com] >Sent: Friday, May 10, 2013 3:35 PM >To: Corey Dean >Cc: David Osborn; app_rpt-users(a)ohnosec.org >Subject: Re: [App_rpt-users] Ubiquiti Equipment > >Rocket M5's are the toughest stuff they make (that I've used). With >the 30 dbi dish and radome cover they're great but that's a bit much >for 10 miles. I think you could do that shot using Nanobridges with >the 25dbi (18 inch) dish. I have a 20 mile shot using those with no >problems. For $95 us dollars each they're a steal. Make sure you >use shielded cable with the RJ45's that ground the shield at either >end. Also watch the 5.6 band (though i'm not sure what your amateur >band plan might include). They use it for radar here and an ISP in >Utah got a hefty fine for operating on that frequency. > >73 de K0JSC > > >On Fri, May 10, 2013 at 1:09 PM, Corey Dean ><n3fe(a)repeater.net<mailto:n3fe@repeater.net>> wrote: >They sure can! I am running some bullet5's with 25 dbi grids >looking at each other for just over 5 years in North Central, PA and >well as Nanostations and they have not had any problems. Most are >mounted on towers and have seen some pretty harsh weather! > >Corey N3FE >________________________________________ >From: >app_rpt-users-bounces(a)ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> >[app_rpt-users-bounces(a)ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org>] >On Behalf Of David Osborn [david.osborn(a)manx.net<mailto:david.osborn@manx.net>] >Sent: Friday, May 10, 2013 1:58 PM >To: app_rpt-users(a)ohnosec.org<mailto:app_rpt-users@ohnosec.org> >Subject: [App_rpt-users] Ubiquiti Equipment > >Hi Gang, > >In recent messages, Ubiquiti equipment has been mentioned for links. > >I was wondering how it stacks-up in terms of keeping out / >withstanding the weather. I have an application in mind for an >AllStar node and it will be on a wild hilltop with nasty weather >(very). The path I have in mind is just under 10 miles, clear line-of-sight. > >Can any of the ubiquiti stuff stand a bit of a weather bashing and, >if so, which items have been found best? > >David >GD4HOZ > > >-- >This message was scanned and is believed to be clean. >Click here to report this message as >spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=DE7951FA3.A71BD> >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org<mailto:App_rpt-users@ohnosec.org> >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > >-- >This message was scanned and is believed to be clean. >Click here to report this message as >spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=CBC4C1FA3.AB560> >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Read URIx Status
by Chris Andrist 10 May '13

10 May '13

I am trying to figure out if my URIx is reading the 5v coming from my radio to activate the COR Active High voltage. Is there a way to read what each pin on the URIx is doing from app_rpt? Regards, Chris Andrist, KC7WSU

1 0

Ubiquiti Equipment
by David Osborn 10 May '13

10 May '13

Hi Gang, In recent messages, Ubiquiti equipment has been mentioned for links. I was wondering how it stacks-up in terms of keeping out / withstanding the weather. I have an application in mind for an AllStar node and it will be on a wild hilltop with nasty weather (very). The path I have in mind is just under 10 miles, clear line-of-sight. Can any of the ubiquiti stuff stand a bit of a weather bashing and, if so, which items have been found best? David GD4HOZ

6 7

Re: [App_rpt-users] Ubiquiti Equipment
by Philip Dorr 10 May '13

10 May '13

All of the outdoor equipment has been fine for the WISP I work for. Make sure you put the LEDs on the bottom or side. I would recommend the NanoBridge or AirGrid, if possible. (You may need a Rocket link though) They even have some equipment that can work in the amateur spaces (2.3, 3.6, 5.7, maybe others). You have to buy the international models, if you want to use them though. On May 10, 2013 1:06 PM, "David Osborn" <david.osborn(a)manx.net> wrote: > > Hi Gang, > > > > In recent messages, Ubiquiti equipment has been mentioned for links. > > > > I was wondering how it stacks-up in terms of keeping out / withstanding the weather. I have an application in mind for an AllStar node and it will be on a wild hilltop with nasty weather (very). The path I have in mind is just under 10 miles, clear line-of-sight. > > > > Can any of the ubiquiti stuff stand a bit of a weather bashing and, if so, which items have been found best? > > > > David

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 51, Issue 9
by Bill Hurlock 10 May '13

10 May '13

I have checked each of the 3 GM300's I have and each of them goes from 0vdc low (lead open not connected to RTCM) and 13.82vdc HI. This is right off the Accessory plug pin #4. Radio programmed for PL/DPL & CSQ Det. Bill Hurlock -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request(a)ohnosec.org Sent: Friday, May 10, 2013 12:00 PM To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 51, Issue 9 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

2 1

Acid Install issue
by wa3lco＠velocity.net 10 May '13

10 May '13

I am a noobie with the Allstar System. I had a working copy of Linux Ubuntu on a machine and decided to install the Acid install on it to simplify Allstar setup. I did have Asterisk and all running but just couldn't find the assistance to get the thing working. Anyway, I now have a glitch where the Acid install doesn't see my Wifi card so I assume that there is a driver missing for it. How do I go about installing this driver. Obviously there must be a Linux flavor around as it worked fine with Ubuntu. Out of curiosity, has anyone set up the Allstar on Ubuntu? 73 Floyd WA3LCO wa3lco(a)velocity.net

4 4

strange registration message
by pete M 06 May '13

06 May '13

got this from time to time.. [May 6 13:31:30] NOTICE[1591]: chan_iax2.c:9712 socket_process: Registration of '27821' rejected: '<unknown>' from: '67.215.233.178' [May 6 13:52:20] NOTICE[1594]: chan_iax2.c:9712 socket_process: Registration of '28739' rejected: '<unknown>' from: '67.215.233.178' ( Iam watching my log live to find why i a mloosing echolink connection..) And I am seeing that pass from time to time.. Log level was set to core set debug 6 I wonder where I could look for to find the status of the echolink Channel on app_rpt

2 1