- App_rpt-users - lists.keekles.org

re asterisk restarting
by REDBUTTON_CTRL 05 May '13

05 May '13

Anyone know what is going on here? I tried updating from SVN to fix it but it still is borked. Do i have to do a fresh install? No changes to any config files were done before this. It just crapped out today. Jon VA3RQ Connected to Asterisk currently running on VE3YYZ (pid = 23158) Verbosity is at least 3 [May 5 12:20:26] NOTICE[23178]: app_rpt.c:21870 rpt_master: RPT thread restarted on 2344 [May 5 12:20:26] WARNING[23178]: app_rpt.c:21882 rpt_master: rpt_thread restarted on node 2344 -- Re-Loading config for repeater 2344 -- rpt (Rx) initiating call to Radio/usb2344 on Radio/usb2344 [May 5 12:20:26] WARNING[23196]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [May 5 12:20:26] ERROR[23196]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [May 5 12:20:28] NOTICE[23178]: app_rpt.c:21870 rpt_master: RPT thread restarted on 2344 [May 5 12:20:28] WARNING[23178]: app_rpt.c:21882 rpt_master: rpt_thread restarted on node 2344 -- Re-Loading config for repeater 2344 -- rpt (Rx) initiating call to Radio/usb2344 on Radio/usb2344 [May 5 12:20:28] WARNING[23198]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [May 5 12:20:28] ERROR[23198]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory == Set device 2-2 to usb2344 [May 5 12:20:28] WARNING[23199]: chan_usbradio.c:1728 hidthread: Loaded parameters from usbradio_tune_usb2344.conf for device usb2344 . [May 5 12:20:30] NOTICE[23178]: app_rpt.c:21870 rpt_master: RPT thread restarted on 2344 [May 5 12:20:30] WARNING[23178]: app_rpt.c:21882 rpt_master: rpt_thread restarted on node 2344 -- Re-Loading config for repeater 2344 -- rpt (Rx) initiating call to Radio/usb2344 on Radio/usb2344 [May 5 12:20:30] WARNING[23208]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [May 5 12:20:30] ERROR[23208]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [May 5 12:20:32] NOTICE[23178]: app_rpt.c:21870 rpt_master: RPT thread restarted on 2344 [May 5 12:20:32] WARNING[23178]: app_rpt.c:21882 rpt_master: rpt_thread restarted on node 2344 -- Re-Loading config for repeater 2344 -- rpt (Rx) initiating call to Radio/usb2344 on Radio/usb2344 [May 5 12:20:32] WARNING[23210]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [May 5 12:20:32] ERROR[23210]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [May 5 12:20:34] ERROR[23180]: chan_echolink.c:2126 sendcmd: connect() failed to connect to the Echolink server server2.echolink.org [May 5 12:20:34] NOTICE[23178]: app_rpt.c:21870 rpt_master: RPT thread restarted on 2344 [May 5 12:20:34] WARNING[23178]: app_rpt.c:21882 rpt_master: rpt_thread restarted on node 2344 -- Re-Loading config for repeater 2344 -- rpt (Rx) initiating call to Radio/usb2344 on Radio/usb2344 [May 5 12:20:34] WARNING[23212]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [May 5 12:20:34] ERROR[23212]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [May 5 12:20:36] ERROR[23178]: app_rpt.c:21865 rpt_master: Continual RPT thread restarts, killing Asterisk VE3YYZ*CLI> Disconnected from Asterisk server [root@VE3YYZ ~]# Asterisk ended with exit status 1 Asterisk died with code 1. Automatically restarting Asterisk. service asterisk stopmpg123: no process killed service asterisk stop Shutting down asterisk: Asterisk ended with exit status 0 Asterisk shutdown normally.

1 0

Allstar Beagleboard w/ LOX and a pickle
by Scott Miller 05 May '13

05 May '13

Howdy I'm trying to get a previously running node to work. While watching the asterisk -r readout... I try to download the configuration files from the Allstar website and I get this... [May 4 21:46:14] NOTICE[453]: chan_iax2.c:9471 socket_process: Rejected connect attempt from 67.215.233.178, request '0@allstar-sys' does not exist I'm not sure what to do next to fix. Thanks Scott kj6nro Allstar 28534 Beagleboard XM w/ loxRunning Pickle Ubuntu 10.04 LTS

1 0

Echolink Config
by Keith Goobie 04 May '13

04 May '13

Good day all. I am looking to limit who can connect externally from the outside to our echolink enabled channel on our allstar node. I am using the permit feature in the echolink.conf file. When I exceed about twenty entries, it permits no one it appears. I can remedy to some extent with wildcards. Can I use several permit lines with about ten entries each so that they will concatenate within the echolink channel? Thanks in advance Keith -- keith(a)goobie.org Keith Goobie Richmond Hill, ON, CANADA

2 1

MDC1200 and iaxRPT
by Charles Rader 04 May '13

04 May '13

I have an ACID node running on a private network. We use MDC for radios ID. Can iaxRpt display the MDC1200 radio ID in the message/status window? If so how do I go about doing it? Thank you for your time, Charles (kc5dgc)

1 0

Disconnected of echolink everyday..
by Pierre Martel 04 May '13

04 May '13

My node 27821 is getting disconnected from echolink every day.. I restart the service and all come back. Is there a way to check somewhere why is this happening?

1 0

control of the tx tone
by Pierre Martel 04 May '13

04 May '13

Hi! I am using the dsp fonction of the app_rpt as core and tone. And I am using the tone output by the URI to encode my ctcss tone. All is working ok, but I have a few friend that use my repeater with some cross band repeater radio. And they have difficulty cutting in cause they have to wait after the tail and ct. before there cross band repeat radio give them the chance to tx back at the repeater. On my old rc-210 we were able to stop encoding the ctcss tone while the courtesy tone and tail of the repeater..So they were runnign ther xband radio on tone squelch on rx and the tx on there side was fast and sharp. Is there a way to do the same with app_rpt? Pierre VE2PF

6 8

Allstar Autopatch questions:
by Mark Johnston 04 May '13

04 May '13

Hello everyone, A few questions about the autopatch service that allstar offers for $5/mo. Does 911 work correctly? The number / area code the call seems to come from would say I would end up with something in California if it works at all... If not does anyone know if typically, there would be a 10 digit # one could program to dial in most areas to get the same psap? If one needed to have a local number is that an option? If not does anyone know how to setup other providers (voip like) that would work? Thanks, Mark (KC7DMF) node 28344

1 0

Voter/RTCM is less poo-ey now
by Jim Duuuude 03 May '13

03 May '13

The new (version 1.14) firmware, that will be available via SVN starting at 2:15 PM PDT today, seems to be working in non-GPS mode. It seems to be "safe" to use the "latest" again. Jim

1 0

RTCM/Voter firmware
by Jim Duuuude 02 May '13

02 May '13

I seem to have "poo-ed" non-GPS-locked operation of the Voter/RTCM firmware, while vastly improving GPS-locked operation. I will fix this shortly, but whatever you do, don't upgrade to the latest, unless you happen to want some real peace and quiet on your radio channel :-) :-). Jim WB6NIL

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 50, Issue 40
by va3ark 30 Apr '13

30 Apr '13

Hi Tim, Yes I found that page, it's close to what I need but not quite. I'll just edit the rpt.conf file whenever I work on the system. I was hoping to disable only my local node announcements on my computer and have everything else announce. I am picking up quickly the basic settings. I am going to tackle macro and schedules next. 73, Dan, va3ark -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request(a)ohnosec.org Sent: April-30-13 12:00 PM To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 50, Issue 40 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: Disable or change connect messages? (Tim Sawyer) ---------------------------------------------------------------------- Message: 1 Date: Mon, 29 Apr 2013 14:35:56 -0700 From: Tim Sawyer <tim.sawyer(a)me.com> To: va3ark <va3ark(a)cogeco.ca> Cc: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Disable or change connect messages? Message-ID: <A4EE024C-4291-433E-BEF6-9CAE8266F83F(a)me.com> Content-Type: text/plain; charset="windows-1252" See: http://ohnosec.org/drupal/node/103 -- Tim :wq On Apr 27, 2013, at 9:38 AM, va3ark <va3ark(a)cogeco.ca> wrote: > Greetings to the group. This is my first post of potentially many more. > > Quick question; I have 1 repeater on a URIx and 1 link radio on a URIx going to another repeater, on the same node computer. > > In regards to linking the two systems I want to be able to change the Allstar local node connect messages or disable them. I still want other inbound Allstar and Echolink connection announcements. > > I am developing the system and editing the configuration files and will need to restart asterisk often. It would be nice if I didn?t have to hear the connections every time. Is this possible? > > Dan, va3ark > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0