- App_rpt-users - lists.keekles.org

Anyone Use A Mac Mini For AllStar?
by Chris K7AZ 29 May '13

29 May '13

Greetings Group: Just wondering if anyone has used a Mac Mini for an AllStar Node? Thank you, Chris K7AZ Node 29275

3 2

How to connect five nodes on different mountains connected via WLan (HamNet?
by Thomas Delmonego 29 May '13

29 May '13

Hi to all! I try to connect five repeaters (nodes) on different mountains and provided with AllStarLink on Acid OS. All mountains are connected with HamNet, an Amateur wireless lan operating in 2,4 GHz and 5,8 GHz Amateur Band and with no connection to Internet. How can I configure AllStarLink files to create a permanent connection? Can anyone help me with instructions for a beginner? Many thanks to all group! 73! Thomas, IW3AMQ

4 7

Re : Re: URI audio issue
by pete M 27 May '13

27 May '13

He is using the output of his repeater controler. --- Message initial --- De : "Ken" <ke2n(a)cs.com> Envoyé : 26 mai 2013 14:48 A : area51now(a)aol.com, app_rpt-users(a)ohnosec.org Objet : Re: [App_rpt-users] URI audio issue The mic input (pin 9) goes direct to the chip with no attenuation or filtering. If you put too much audio there, you can burn out the input of the chip. It's pin 21 you want, as others have noted. The input calibration routine will tell you if it is working ("radio tune rxnoise" for starters) 73 Ken From: area51now(a)aol.com [mailto:area51now@aol.com] Sent: Saturday, May 25, 2013 3:16 PM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] URI audio issue Hello I am new allstar and am working on converting my current echo link to the allstar. I have it all hooked up to the repeater and i am not getting any audio coming back over the internet I have the repeater receive audio hooked to the mic input of the URI (it tried both inputs) and i have verified there is audio present on that input. I have tried it in VOX, and have inverted the cos signal but no audio. I welcome any input on this issue. Thanks Bob _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

Flag when local Cor is active
by Wally Carriero 27 May '13

27 May '13

I would like know how to get a flag when the node is receiving a local transmission. I can set the flag for the transmitter active but prefer to do some idle messages after x minutes of inactivity. I have both xipar and allstar boxes. Sent from my iPad

1 0

URI audio issue
by area51now＠aol.com 26 May '13

26 May '13

Hello I am new allstar and am working on converting my current echo link to the allstar. I have it all hooked up to the repeater and i am not getting any audio coming back over the internet I have the repeater receive audio hooked to the mic input of the URI (it tried both inputs) and i have verified there is audio present on that input. I have tried it in VOX, and have inverted the cos signal but no audio. I welcome any input on this issue. Thanks Bob

4 3

CentOS-6 based ACID ?
by KB0KZR 24 May '13

24 May '13

Any progress on CentOS-6? If not, I'll try my hand at it... -Matt-

3 3

AllStar/Asterisk
by James Hill 24 May '13

24 May '13

Hi all, I'm new to Allstar, and have a couple of questions: I've used the acid_centos many times as a base for D-STAR gateway boxes, so I'm quite conversant with the distro. The main question, is can Asterisk be configured to use the machine's on board soundcard, and Serial for PTT? I'm trying to build a system from bits and bobs I have lying around in the shack. A friend did mod a CM108 USB dongle a few years back for me, but it never worked and got trashed. I haven't the budget or steady hand to go buying a URI or to start modding CM108 devices. Thanks, James G0FHM

2 1

Audio detection
by Andreas Stefan 24 May '13

24 May '13

1 0

connect vs. permanently connect
by KB0KZR 24 May '13

24 May '13

What's the difference between Connect (ilink,3) and Permanently Connect (ilink,13)? Does one attempt to re-establish the link if the connection drops for whatever reason? Or is it just that ilink,13 can't be brought down by ilink,1? -Matt-

2 1

Re: [App_rpt-users] How to connect five nodes on different mountains connected via WLan (HamNet?
by Thomas Delmonego 24 May '13

24 May '13

Many thanks for your reply, Johnny! I have another problem, I have no internet connection. See the reply from Robert. 73! Thomas, IW3AMQ Date: Thu, 23 May 2013 19:37:44 -0700 From: cypresstower(a)yahoo.com Subject: Re: [App_rpt-users] How to connect five nodes on different mountains connected via WLan (HamNet? To: iw3amq(a)dnet.it You could try this: ADD the following TWO LINES to your ilink commands located under the functions stanza in your rpt.conf [functions] 03=ilink,13 ;permanently connected link 01=ilink,11 ;permanently disconnected link restart your node now if you want to permanently connect a link do this *03xxxxx to disconnect this previously permanently connected link *01xxxxx --- On Thu, 5/23/13, Thomas Delmonego <iw3amq(a)dnet.it> wrote: From: Thomas Delmonego <iw3amq(a)dnet.it> Subject: [App_rpt-users] How to connect five nodes on different mountains connected via WLan (HamNet? To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Date: Thursday, May 23, 2013, 8:49 AM Hi to all! I try to connect five repeaters (nodes) on different mountains and provided with AllStarLink on Acid OS. All mountains are connected with HamNet, an Amateur wireless lan operating in 2,4 GHz and 5,8 GHz Amateur Band and with no connection to Internet. How can I configure AllStarLink files to create a permanent connection? Can anyone help me with instructions for a beginner? Many thanks to all group! 73! Thomas, IW3AMQ -----Inline Attachment Follows----- _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0