- App_rpt-users - lists.keekles.org

Anyway to detect recent activity
by Alan Adamson 10 Jul '12

10 Jul '12

I'd like to make some scripts of mine a little smarter. Is there any way to determine if the node has been active within the last ID timer window of time. E.g. instead of firing a *speak the time at the top of the hour* script, I'd only like to happen if the node is inside the countdown timer for a final ID. This is how most of the configurable external controllers work. Then once the final ID fires, the repeater is quite until activity again, then resumes its scripts, etc until no activity after its final ID time countdown. Just curious if there are any provisions for similar either internal or external (environment variable, polled value from asterisk -rx, etc) Alan

4 5

Echolink issues?
by Mark Huelskoetter 09 Jul '12

09 Jul '12

So, I maintain node 27597 which is the connection to IRLP reflector 9070. For no apparent reason I am now getting the : "Error in parsing header on nawest.echolink.org" Error. I have the servers set to nawest, nasouth and naeast. Same error on all three servers. Anyone else having problems parsing echolink headers? Thanks in advance. WL7NI Mark

2 3

Re: [App_rpt-users] DTMF Mute
by Alan Adamson 09 Jul '12

09 Jul '12

propogate_dtmf=yes will do it. Alan From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Eric Harrison Sent: Monday, July 09, 2012 3:14 PM To: Allstar User Subject: [App_rpt-users] DTMF Mute I have looked hi and low for a command to unmute DTMF tones so they will pass through to the output of the repeater. Any doing this or know how to do this? Eric (N7JYS) Marshall's Communications

1 0

DTMF Mute
by Eric Harrison 09 Jul '12

09 Jul '12

I have looked hi and low for a command to unmute DTMF tones so they will pass through to the output of the repeater. Any doing this or know how to do this? Eric (N7JYS) Marshall's Communications

1 0

Re: [App_rpt-users] manually adjust rxtone and rxvoice
by K&R Yoksh 08 Jul '12

08 Jul '12

I much prefer SimpleUSB myself, although my nodes all use COR/COS lines and muted filtered audio... Much less PC horsepower required, especially if you're not using the DSP for PL/COR.. I looked in /etc/init.d and didn't have either of these files: 3. delete /etc/init.d/usbradio 4. touch /etc/init.d/simpleusb Just for fun, I created the simpleusb file and restarted Asterisk. I didn't notice any changes.. What do these files in /etc/init.d do? Also, when switching to SimpleUSB, make sure to do simpleusb-tune-menu and check your audio settings. When you (W)rite the parameters, different data files are saved to /etc/asterisk: simpleusb_tune_usb2211.conf rather than usbradio_tune_usb2211.conf 73 Kyle K0KN --- Original Message --- Simpleusb needs a COR and optionally a PL line from your radio. Here are the steps to switch. Of course you may want to rename rather than delete at steps 2 and 3. 1. copy /usr/src/astsrc/configs/simpleusb/simpleusb.conf to /etc/asterisk/ 2. delete /etc/asterisk/usbradio* 3. delete /etc/init.d/usbradio 4. touch /etc/init.d/simpleusb 5. edit /etc/asterisk/rpt.conf rxchannel=SimpleUSB/usb 6. reboot -- Tim :wq

1 0

Use eBox computer for server node
by Eric Guth 08 Jul '12

08 Jul '12

Folks - I have this computer: eBox-3350MX-AP Standard version with Auto Power On and Power Adapter eBox-3350MX PMX-1000 1GHz processor, onboard 512MB DDR2 memory, integrated graphics chip/D-Sub 15-pin, 10/100 Mbps LAN(RJ-45 connector)Built-in PXE diskless boot function, 3x USB ports(2 in the front 1 at the rear) Mic in and Line out, 1x SD slot(bootable but not hot-swappable), Auto Power On Support Power Adapter included. Use with SMART SD Cards: 1SG9SD1, 1GB(SG9SD1GPHC9) or 1SG9SD2, 2GB(SG9SD2GPHCA) I want to build a mobile Allstar server/node for my car using a URI. Will this computer work for Allstar and what version of the download would I use? 73, Eric 4Z5UG / WA6IGR Allstar Node: 28422 4Z5UG(a)guth.us<mailto:4Z5UG@guth.us> Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840

3 5

Re: [App_rpt-users] Use eBox computer for server node
by Steve Zingman 07 Jul '12

07 Jul '12

Eric, Since it will take a SD card, it should be possible. I would look into Limey Linux or Pickle Linux. 73, Steve N4IRS Message: 2 Date: Sat, 7 Jul 2012 14:59:28 -0400 From: Eric Guth <eric(a)efratnetworks.com> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] Use eBox computer for server node Message-ID: <4198F8C5954EED46AFC553CAFC879B7C3D264BCB73(a)MBX75.ad2.softcom.biz> Content-Type: text/plain; charset="us-ascii" Folks - I have this computer: eBox-3350MX-AP Standard version with Auto Power On and Power Adapter eBox-3350MX PMX-1000 1GHz processor, onboard 512MB DDR2 memory, integrated graphics chip/D-Sub 15-pin, 10/100 Mbps LAN(RJ-45 connector)Built-in PXE diskless boot function, 3x USB ports(2 in the front 1 at the rear) Mic in and Line out, 1x SD slot(bootable but not hot-swappable), Auto Power On Support Power Adapter included. Use with SMART SD Cards: 1SG9SD1, 1GB(SG9SD1GPHC9) or 1SG9SD2, 2GB(SG9SD2GPHCA) I want to build a mobile Allstar server/node for my car using a URI. Will this computer work for Allstar and what version of the download would I use? 73, Eric 4Z5UG / WA6IGR Allstar Node: 28422 4Z5UG(a)guth.us<mailto:4Z5UG@guth.us> Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840

2 1

I really need to turn off the announcements
by NO9S Node 28717 07 Jul '12

07 Jul '12

I have tried all the recommendations, I must be missing something..?????

3 3

Re: [App_rpt-users] Use eBox computer for server node
by Tim Sawyer 07 Jul '12

07 Jul '12

If you're running something at your house and/or you don't care if it goes down while you're at work or on vacation or whatever then you can get away with all sorts of short cuts. But if it's on a hill 3 hours away or one not accessible in the winter I wouldn't do ACID. I know of one system where a fella made a special effort to get ACID running on Debian writing as infrequently as possible to CF media. All of the nodes crapped out within a few years. Limey Linux loads everything into RAM and dismounts the media. No chance of random glitches to the media. It's not that hard to install once you get dd figured out. It runs great. It's the only way to go for remote systems. Oh and, doesn't Linux run for 24 hours a day, not 8? If so 10 years just became 3. -- Tim :wq On Jul 7, 2012, at 3:01 PM, Neal Garbenis wrote: > I really don't see wearing out flash drives as an issue. It really takes a > Long time. And there cheap you can have back ups. Two if your that worried about it turn off some logging you'll probably get a couple more years out of it > > For instance—it would take over 10 years to wear out a single area on an SD Card based on a file of any size (from 512 bytes to maximum capacity) being rewritten 3 times per hour, 8 hours a day, 365 days per year. > > This is for 100,000 write cycles. Most card today handle well above that > > Neal Garbenis Jr. > NG8Y > > > > On Jul 7, 2012, at 5:17 PM, Tim Sawyer <tim.sawyer(a)me.com> wrote: > >> ACID should not be run on limited write memory. It will do-in the card eventually. >> >> -- >> Tim >> :wq >> >> On Jul 7, 2012, at 1:52 PM, Neal Garbenis wrote: >> >>> I doubt Limey will work I'd try to put acid on it that should work just fine. >>> >>> Neal Garbenis Jr. >>> NG8Y >>> >>> >>> >>> On Jul 7, 2012, at 2:59 PM, Eric Guth <eric(a)efratnetworks.com> wrote: >>> >>>> Folks - I have this computer: >>>> >>>> eBox-3350MX-AP Standard version with Auto Power On and Power Adapter >>>> eBox-3350MX PMX-1000 1GHz processor, onboard 512MB DDR2 memory, integrated graphics chip/D-Sub 15-pin, 10/100 Mbps LAN(RJ-45 connector)Built-in PXE diskless boot function, 3x USB ports(2 in the front 1 at the rear) Mic in and Line out, 1x SD slot(bootable but not hot-swappable), Auto Power On Support Power Adapter included. Use with SMART SD Cards: 1SG9SD1, 1GB(SG9SD1GPHC9) or 1SG9SD2, 2GB(SG9SD2GPHCA) >>>> I want to build a mobile Allstar server/node for my car using a URI. Will this computer work for Allstar and what version of the download would I use? >>>> >>>> 73, >>>> >>>> Eric >>>> 4Z5UG / WA6IGR >>>> Allstar Node: 28422 >>>> 4Z5UG(a)guth.us >>>> Israel Direct: 077-950-9451 >>>> USA Direct: +1-720-377-3840 >>>> >>>> >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)ohnosec.org >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

These Stanzas
by NO9S Node 28717 07 Jul '12

07 Jul '12

To allow this telemetry Where are they located? The Cop I found. A newbie

2 1