- App_rpt-users - lists.keekles.org

RE : Use eBox computer for server node
by Pierre Martel 07 Jul '12

07 Jul '12

I am using something similar a thin client from HP . I replaced the 1gig flash drive by a 6 gig hd and its working ok.. I even use one of those with dstar.. Donr run limey or pickle acid run like a charm on those .. Unless its not a x86 processor.. Envoyé depuis un mobile Samsung Eric Guth <eric(a)efratnetworks.com> a écrit : Folks - I have this computer: eBox-3350MX-AP Standard version with Auto Power On and Power Adapter eBox-3350MX PMX-1000 1GHz processor, onboard 512MB DDR2 memory, integrated graphics chip/D-Sub 15-pin, 10/100 Mbps LAN(RJ-45 connector)Built-in PXE diskless boot function, 3x USB ports(2 in the front 1 at the rear) Mic in and Line out, 1x SD slot(bootable but not hot-swappable), Auto Power On Support Power Adapter included. Use with SMART SD Cards: 1SG9SD1, 1GB(SG9SD1GPHC9) or 1SG9SD2, 2GB(SG9SD2GPHCA) I want to build a mobile Allstar server/node for my car using a URI. Will this computer work for Allstar and what version of the download would I use? 73, Eric 4Z5UG / WA6IGR Allstar Node: 28422 4Z5UG(a)guth.us Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840

1 0

Re: [App_rpt-users] Quiet Allstar node
by (KP4TR)Ramon Gonzalez 07 Jul '12

07 Jul '12

For benefit of all, Doug found my answer and works perfectly. Thanks. On 7/7/2012 12:16 PM, DougH wrote: > Hello Ramon, > This may explain..... > http://www.allstarnode.com/viewtopic.php?f=6&t=17 > Regards, > Doug - GM7SVK > > ----- Original Message ----- > *From:* (KP4TR)Ramon Gonzalez <mailto:kp4tr.ramon@gmail.com> > *To:* app_rpt mailing list <mailto:app_rpt-users@ohnosec.org> > *Sent:* Saturday, July 07, 2012 5:07 PM > *Subject:* [App_rpt-users] Quiet Allstar node > > Hello, > > I have a need to sometimes silence my Allstar node to not make any > connect/disconnect announcements. Going thru the docs, I cannot > identify how this can be easily done. > > Anyone know? Thanks. > > ------------------------------------------------------------------------ > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > ------------------------------------------------------------------------ > > No virus found in this message. > Checked by AVG - www.avg.com <http://www.avg.com> > Version: 2012.0.2195 / Virus Database: 2437/5115 - Release Date: > 07/06/12 > > No virus found in this message. > Checked by AVG - www.avg.com <http://www.avg.com> > Version: 2012.0.2195 / Virus Database: 2437/5115 - Release Date: 07/06/12 >

2 1

Quiet Allstar node
by (KP4TR)Ramon Gonzalez 07 Jul '12

07 Jul '12

Hello, I have a need to sometimes silence my Allstar node to not make any connect/disconnect announcements. Going thru the docs, I cannot identify how this can be easily done. Anyone know? Thanks.

1 0

Dual Mode (DV and FM) systems go-live
by Ramesh Dhami (VA3UV) 07 Jul '12

07 Jul '12

Hi All; After months of development / testing and challenges with my repeater site <G>, we now have two fully functional / automatic D-STAR compatible and FM (app_rpt enabled) repeaters on-the-air in the Greater Toronto Area. The repeaters both use commercial grade FM repeaters. The auto-switching between FM and DV is managed by an external multiplexer that Jon (VA3RQ) and I designed. In the case of repeaters that have two audio inputs (TXA and TD), the multiplexer allows for the switching of audio between these 2 inputs (FM audio into the TXA input and D-STAR 'data' into the TD input). For repeaters that have only one audio input, the Multiplexer caters for this case too. Please contact me off-list for further details. Just for the record, we are not selling the Multiplexer, it is an open source project, the schematic is available, you build it, you get to enjoy it :). Cheers! Ramesh.

1 0

Re: [App_rpt-users] Radio connection with TDM400P
by Steve Zingman 06 Jul '12

06 Jul '12

Wade, There is some information available on the net. A lot of it is rather old, but may get you going in the right direction. see: <http://www.qsl.net/kb9mwr/projects/voip/asterisk-radio.html> 73, Steve N4IRS On 07/06/2012 07:45 AM, app_rpt-users-request(a)ohnosec.org wrote: > Message: 2 > Date: Thu, 05 Jul 2012 22:31:15 -0500 > From: wade<wadeo(a)charter.net> > To:app_rpt-users@ohnosec.org > Subject: [App_rpt-users] Radio connection with TDM400P > Message-ID:<4FF65C03.5040203(a)charter.net> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Good evening all, > > I am just starting out with all this Asterisk stuff and during my > research I had a question that I couldn't find an answer to. Instead of > finding and modifying a USB FOB or buying a URI, can I use a TDM400P > card in the computer with FXS boards installed? Is there anything I > should know about hook up and computer config. before hand? Schematics, > drawings, or pictures are always a big help. Any info would be greatly > appreciated! > > Thanks > Wade > KC0LMT

1 0

Re: [App_rpt-users] manually adjust rxtone and rxvoice
by Tim Sawyer 06 Jul '12

06 Jul '12

Yes, the URI and URIx work just fine with simpleusb. Set levels with simpleusb-tune-menu. -- Tim :wq On Jul 6, 2012, at 7:02 AM, pete M wrote: > ok I have ts-64 collecting dust, will try that.. > > Just one other thing, will the input/output of the URI will work with simpleusb? > > > > > From: Tim Sawyer > Sent: Friday, July 06, 2012 9:58 AM > To: APP RPT > Subject: Re: [App_rpt-users] manually adjust rxtone and rxvoice > > Simpleusb needs a COR and optionally a PL line from your radio. Here are the steps to switch. Of course you may want to rename rather than delete at steps 2 and 3. > > 1. copy /usr/src/astsrc/configs/simpleusb/simpleusb.conf to /etc/asterisk/ > 2. delete /etc/asterisk/usbradio* > 3. delete /etc/init.d/usbradio > 4. touch /etc/init.d/simpleusb > 5. edit /etc/asterisk/rpt.conf rxchannel=SimpleUSB/usb > 6. reboot > > -- > Tim > :wq > > On Jul 6, 2012, at 6:49 AM, pete M wrote: > >> Thanks Tim >> >> Yup did try boost or no boost, flat audio, ect.. >> >> Can you tell me how an I switch to simpleusb from usbradio? >> >> >> >> >> From: Tim Sawyer >> Sent: Friday, July 06, 2012 9:45 AM >> To: APP RPT >> Cc: Pierre Martel >> Subject: Re: [App_rpt-users] manually adjust rxtone and rxvoice >> >> I don't know anything about the IC3200A but some radios just won't work with usbradio. Did you try setting rxboost in usbradio.conf? It that's no help then you may need to use simpleusb rather than usbradio. >> -- >> Tim >> :wq >> >> On Jul 6, 2012, at 3:18 AM, Pierre Martel wrote: >> >>> Hi! >>> >>> No mater how I try I cant adjust my node to work with a small ic 3200A as my radio. >>> >>> Got direct connection to the discriminator, same for modulator, and I got my self a cor signal.. >>> >>> Its all working perfectly with my old sound card on my win xp echolink node.. >>> >>> when I connect this to my URI I have to use the lowest possible setting for txvoice and txtone but its ok.. >>> >>> when I try to do rxnoise, it allways fail. >>> >>> from time to time I will have the rxtone pass, but it wont detect station that are more then 10 miles from the radio.. >>> and for rxvoice , it will work ok if rxtone worked.. >>> >>> I did all this setup on a Ic-706 mkIIg and all was so easy.. >>> >>> or Should I start back from scratch? and how do I do it? >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> >> > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >

1 0

Re: [App_rpt-users] manually adjust rxtone and rxvoice
by Tim Sawyer 06 Jul '12

06 Jul '12

Simpleusb needs a COR and optionally a PL line from your radio. Here are the steps to switch. Of course you may want to rename rather than delete at steps 2 and 3. 1. copy /usr/src/astsrc/configs/simpleusb/simpleusb.conf to /etc/asterisk/ 2. delete /etc/asterisk/usbradio* 3. delete /etc/init.d/usbradio 4. touch /etc/init.d/simpleusb 5. edit /etc/asterisk/rpt.conf rxchannel=SimpleUSB/usb 6. reboot -- Tim :wq On Jul 6, 2012, at 6:49 AM, pete M wrote: > Thanks Tim > > Yup did try boost or no boost, flat audio, ect.. > > Can you tell me how an I switch to simpleusb from usbradio? > > > > > From: Tim Sawyer > Sent: Friday, July 06, 2012 9:45 AM > To: APP RPT > Cc: Pierre Martel > Subject: Re: [App_rpt-users] manually adjust rxtone and rxvoice > > I don't know anything about the IC3200A but some radios just won't work with usbradio. Did you try setting rxboost in usbradio.conf? It that's no help then you may need to use simpleusb rather than usbradio. > -- > Tim > :wq > > On Jul 6, 2012, at 3:18 AM, Pierre Martel wrote: > >> Hi! >> >> No mater how I try I cant adjust my node to work with a small ic 3200A as my radio. >> >> Got direct connection to the discriminator, same for modulator, and I got my self a cor signal.. >> >> Its all working perfectly with my old sound card on my win xp echolink node.. >> >> when I connect this to my URI I have to use the lowest possible setting for txvoice and txtone but its ok.. >> >> when I try to do rxnoise, it allways fail. >> >> from time to time I will have the rxtone pass, but it wont detect station that are more then 10 miles from the radio.. >> and for rxvoice , it will work ok if rxtone worked.. >> >> I did all this setup on a Ic-706 mkIIg and all was so easy.. >> >> or Should I start back from scratch? and how do I do it? >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > >

1 0

manually adjust rxtone and rxvoice
by Pierre Martel 06 Jul '12

06 Jul '12

Hi! No mater how I try I cant adjust my node to work with a small ic 3200A as my radio. Got direct connection to the discriminator, same for modulator, and I got my self a cor signal.. Its all working perfectly with my old sound card on my win xp echolink node.. when I connect this to my URI I have to use the lowest possible setting for txvoice and txtone but its ok.. when I try to do rxnoise, it allways fail. from time to time I will have the rxtone pass, but it wont detect station that are more then 10 miles from the radio.. and for rxvoice , it will work ok if rxtone worked.. I did all this setup on a Ic-706 mkIIg and all was so easy.. or Should I start back from scratch? and how do I do it?

2 1

Radio connection with TDM400P
by wade 06 Jul '12

06 Jul '12

Good evening all, I am just starting out with all this Asterisk stuff and during my research I had a question that I couldn't find an answer to. Instead of finding and modifying a USB FOB or buying a URI, can I use a TDM400P card in the computer with FXS boards installed? Is there anything I should know about hook up and computer config. before hand? Schematics, drawings, or pictures are always a big help. Any info would be greatly appreciated! Thanks Wade KC0LMT

2 1

Tone Controll
by Eric Harrison 06 Jul '12

06 Jul '12

Is anyone using tone control in the usbradio.conf file? (txtoctype) No matter how I set this No, Phase, Notone, the tone still rides out the squelch tail, so instead of just hear the voice audio only I get repeater ID'S and CT's as well. Is there somethig else I'm missing? Eric (N7JYS) Marshall's Communications

5 9