- App_rpt-users - lists.keekles.org

Stretch
by Dan Srebnick 14 Mar '18

14 Mar '18

Is the github DIAL project ready to be built on Debian/Raspbian Stretch? Steve mentioned a while back that he was going to be working on it. 73, Dan Srebnick K2DLS

2 2

Re: [App_rpt-users] Random node assignments (fixed for now)
by John Rudolph- N2YP 09 Mar '18

09 Mar '18

UPDATE: While doing some research on the EEPROM for the node I found the ASL page that talked about radio-tune-menu and doing a "W-write" for each one after doing the port swap and flashing to determine which is which. The write seemed to have fixed it. I previously had done the radio-tune-menu with just the two nodes and didn't have to do the write but it fixed this problem. -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 109, Issue 6
by John Rudolph- N2YP 09 Mar '18

09 Mar '18

Here is what I get. From the looks of it 2 of the ports look like they are using the same bus. I wonder if that may have something to do with it. Interestingly they are all stacked one on top of the other looking like I've large device. I will play with it tomorrow and see if I can track down which on the list were the ones working fine and experiment for the short term until I can get the chips in and installed. root@N2YP_Rogers_Knob:~# lsusb Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0d8c:013a C-Media Electronics, Inc. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 0d8c:013a C-Media Electronics, Inc. Bus 005 Device 002: ID 0d8c:013a C-Media Electronics, Inc. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub root@N2YP_Rogers_Knob:~# >Message: 2 >Date: Wed, 7 Mar 2018 15:38:02 -0800 >From: Bob Pyke <k6ecm1(a)gmail.com> >To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> >Subject: Re: [App_rpt-users] Random node assignments >Message-ID: <EC51CE10-28D1-47AC-AEE6-4CD238B72813(a)gmail.com> >Content-Type: text/plain; charset=us-ascii > >When it works, does the tune config file reflect what is seen in lsusb? > > >Thanks, >Bob >k6ecm >73 >Sent from my iPhone > >> On Mar 7, 2018, at 2:02 PM, John Rudolph- N2YP <John(a)n2yp.com> wrote: >> >> I've been running a 2 node URI Dial setup on a computer with no >issues. Last night I installed a 3rd URI node and now every time I >reboot asterisk it randomly assigns the node number to each radio/URI >pair and it's never the same. I'm not using a USB hub but just the USB >ports on the back of the computer and I have left things plugged into >the same ports. I've tried swapping USB to node via radio-tune-menu >which works until I reboot. Thoughts? >> >> John N2YP

2 1

Random node assignments
by John Rudolph- N2YP 08 Mar '18

08 Mar '18

I've been running a 2 node URI Dial setup on a computer with no issues. Last night I installed a 3rd URI node and now every time I reboot asterisk it randomly assigns the node number to each radio/URI pair and it's never the same. I'm not using a USB hub but just the USB ports on the back of the computer and I have left things plugged into the same ports. I've tried swapping USB to node via radio-tune-menu which works until I reboot. Thoughts? John N2YP -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

3 2

Google Allstar Node Connection Maps
by Greg Thornwall 06 Mar '18

06 Mar '18

I created a list active Allstar nodes with node number links that displays the connections to other nodes on a Google map: http://stats.allstarlink.org/maps/allstarNodesMap.php Some examples: East coast hub: http://stats.allstarlink.org/maps/nodeMap.html?node=27339 The Win System: http://stats.allstarlink.org/maps/nodeMap.html?node=2560 I also started a main page : http://stats.allstarlink.org/maps/ Some nodes don't have coordinates set or they are 0,0. 73 Greg KD3SU

3 3

Re: [App_rpt-users] Google Allstar Node Connection Maps
by thorn＠myactv.net 06 Mar '18

06 Mar '18

I wonder if the nodes have the same coords? I also need to add a small random offset for location since some nodes are at the same QTH. I tried another that just had one node connected, a bug. I also see that if there is nothing or just 2 others connected the node does not show up on the map. I'll have to fix that. tnx, 73 Greg --- k5cg(a)hamoperator.org wrote: From: K5CG <k5cg(a)hamoperator.org> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Google Allstar Node Connection Maps Date: Tue, 6 Mar 2018 10:08:03 -0800 (PST) This is really nice! The examples are working great. However, I have connected my node to another, but it is not showing on the map (blank) after clicking my node number from the http://stats.allstarlink.org/maps/allstarNodesMap.php page. Is there an update delay? Danny K5CG ----- Original Message ----- From: "Greg Thornwall" <thorn(a)myactv.net> To: "App rpt-users" <App_rpt-users(a)lists.allstarlink.org> Sent: Tuesday, March 6, 2018 11:05:43 AM Subject: [App_rpt-users] Google Allstar Node Connection Maps I created a list active Allstar nodes with node number links that displays the connections to other nodes on a Google map: http://stats.allstarlink.org/maps/allstarNodesMap.php Some examples: East coast hub: http://stats.allstarlink.org/maps/nodeMap.html?node=27339 The Win System: http://stats.allstarlink.org/maps/nodeMap.html?node=2560 I also started a main page : http://stats.allstarlink.org/maps/ Some nodes don't have coordinates set or they are 0,0. 73 Greg KD3SU _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

AllStar interface and +
by Gervais Fillion 04 Mar '18

04 Mar '18

hi all i need some support: i have here and Baofeng 888 that has been mofify with a sound card and a Cheap Chinese Pi clone ,modified so it runs SVXLINK and Echolink. i need someone that could take a look and tell me if i can modify and used it on Allstar. thats not me that built it so i dont know what has been done but it is working no1. Also i got an MSR2000 VHF that i want to modufy for AllStar,, what interface should i baught? is there any web site that gaving some help of what need to be done ? i could exchange anyway this Echolink 888 also for an AllStar since i dont need it,i want to try AllStar. thanks in advance for your help,it is mostly appreciated 73's Gervais VE2CKN

3 2

Re: [App_rpt-users] App_rpt-users Digest, Vol 109, Issue 3
by Gervais Fillion 04 Mar '18

04 Mar '18

jesse, thanks for responding i dont see any attachment,,all i am seeing is coded page. please send it direct at me ve2ckn2 at hotmail.fr what interface did you connect on these card? thanks again i have no knowledge so i am doing this from the beginning 73 gervais ve2ckn ps if you have any pictures send them,i will look at them thanks ________________________________ De : App_rpt-users <app_rpt-users-bounces(a)lists.allstarlink.org> de la part de app_rpt-users-request(a)lists.allstarlink.org <app_rpt-users-request(a)lists.allstarlink.org> Envoyé : 4 mars 2018 12:00 À : app_rpt-users(a)lists.allstarlink.org Objet : App_rpt-users Digest, Vol 109, Issue 3 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users App_rpt-users Info Page - AllStar Link<http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> lists.allstarlink.org This list is for users of the app_rpt.c Asterisk application, the Debian Install (for) Allstar Link (DIAL) This site is dedicated to the memory of Jim Dixon WB6NIL or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. MRS2000 interface for AllStar ??? (Gervais Fillion) 2. Re: MRS2000 interface for AllStar ??? (mike(a)midnighteng.com) 3. Re: MRS2000 interface for AllStar ??? (Jesse Lloyd) 4. AllStar interface and + (Gervais Fillion) 5. Question???? (David Waters) 6. Re: Question???? (mike(a)midnighteng.com) 7. Re: AllStar interface and + (mike(a)midnighteng.com) 8. Re: Question???? (mike(a)midnighteng.com) ---------------------------------------------------------------------- Message: 1 Date: Sat, 3 Mar 2018 20:58:09 +0000 From: Gervais Fillion <ve2ckn2(a)hotmail.fr> To: "app_rpt-users(a)lists.allstarlink.org" <app_rpt-users(a)lists.allstarlink.org> Subject: [App_rpt-users] MRS2000 interface for AllStar ??? Message-ID: <BN6PR2201MB1298B8E41B2AB5ED0EFE1E7BCFC40(a)BN6PR2201MB1298.namprd22.prod.outlook.com> Content-Type: text/plain; charset="iso-8859-1" hi all well i dont know if i am in the ight group to ask my question,i will let the Moderator filter it: i have an MSR2000 here that i want to be used on AllStar,i need to know what interface i should buy,how to connect it ?? i have not found yet on Facebook any Groups about AllStar. Can you help me,anyone have experiences, any help will appreciated. thanks 73's Gervais ve2ckn

2 1

Question????
by David Waters 04 Mar '18

04 Mar '18

What if anything could cause your node to key up without you knowing about it? I check my node status and in 8 hours 15 mins. I have 285 keyups. Buy I happen to know that the node was only keyed up physically 15 times on that 8 hour window. So I don’t know where the 285 is coming from . So can a node key up without you knowing it?? If so where do I start looking for the problem . This has me confused. David Waters

2 2

MRS2000 interface for AllStar ???
by Gervais Fillion 03 Mar '18

03 Mar '18

hi all well i dont know if i am in the ight group to ask my question,i will let the Moderator filter it: i have an MSR2000 here that i want to be used on AllStar,i need to know what interface i should buy,how to connect it ?? i have not found yet on Facebook any Groups about AllStar. Can you help me,anyone have experiences, any help will appreciated. thanks 73's Gervais ve2ckn

3 2