April 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] iaxrpt
by Bob 06 Apr '14

06 Apr '14

Thanks Mike... root cause, typo (sigh!) I may be getting smarter on this stuff... still a lousy typist. Bob -------- Original Message -------- Subject: [App_rpt-users] iaxrpt From: "Bob" < <mailto:kk6ecm@gmail.com> kk6ecm(a)gmail.com> Date: Sun, April 06, 2014 12:01 am To: < <mailto:app_rpt-users@ohnosec.org> app_rpt-users(a)ohnosec.org> When I put my two nodes located on a single server into iaxrpt, and separately connect to each, both activate the first node URI trasmit LED when I "TRANSMIT" from either in iaxrpt; the node under [radio-secure-proxy]. I have both nodes "register="ed in iax.conf under [general] and as "exten => " under [radio-secure]. [radio-secure-proxy], and "exten =*" under [radio-gui] in extensions.conf. Did I do something incorrectly, or is this a limitation of iax and iaxrp? I'd like to independently connect to either node on the server from iaxrpt. By the way, under CLI, I can selectively activate, adjust, and identify either URI, so I'm sure I don't have any USB confusion. Thanks, Bob kk6ecm _____ _______________________________________________ App_rpt-users mailing list <mailto:App_rpt-users@ohnosec.org> App_rpt-users(a)ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 2

RTCM & Allstar
by Mark Johnston 06 Apr '14

06 Apr '14

Hello Everyone, Looking to have my allstar node and controller at a remote location to the primary tx/rx site - wondering how it could be done with one or two RTCM's. Basically looking to replace the cable between the repeater and controller with the internet... as the sites are a number of miles apart and no clear line of site exists. If that would work with the two, or would it be better just to have one RTCM, and set it up as a voted site on allstar... eventually I may add other sites to vote from... not sure what the best option would be... Any thoughts/ideas recommendations for the use of the RTCM(s) or any better ideas considering I would not have good LOS... Thanks, Mark KC7DMF

1 0

iaxrpt
by Bob 06 Apr '14

06 Apr '14

When I put my two nodes located on a single server into iaxrpt, and separately connect to each, both activate the first node URI trasmit LED when I "TRANSMIT" from either in iaxrpt; the node under [radio-secure-proxy]. I have both nodes "register="ed in iax.conf under [general] and as "exten => " under [radio-secure]. [radio-secure-proxy], and "exten =*" under [radio-gui] in extensions.conf. Did I do something incorrectly, or is this a limitation of iax and iaxrp? I'd like to independently connect to either node on the server from iaxrpt. By the way, under CLI, I can selectively activate, adjust, and identify either URI, so I'm sure I don't have any USB confusion. Thanks, Bob kk6ecm

1 0

Best IAX radio client for Android
by Shane Morris 05 Apr '14

05 Apr '14

Hello all, I am going to probably be taking an Android tablet to Expedition this year, where we use our app_rpt equipment under harsh real life conditions, and this year we have access to a RTCM. This is in direct response to my Macbook having a broken WiNE implementation with OS X 10.8, which was quite embarrassing last year (thanks Apple!). The Android tablet has an e-Ink screen, and is alleged to not be able to run all Android apps (I couldn't imagine playing Angry Birds on it) but banter aside, what is a good IAX2 client program that'll interface to our Beagleboard with PTT over our wifi/ ethernet network and work where my Mac failed? I have seen some discussion concerning iPads in the past, but not being a fan of iDevices, I never paid any notice. Of course, failing a proper client on the tablet, I could run up a Web Transceiver on my FitPC, which is back from warranty repairs, and power it from batteries at HQ. Looking forward to any and all replies. Many thanks! Shane.

2 1

Static ip
by Brian Burton 04 Apr '14

04 Apr '14

Simply put. At the root prompt type setup Goto device configuration. Remove the asterisk in dhcp and assign your static info. Save and exit. Service network restart or reboot to reload. KB3ORS-Brian On Apr 4, 2014 5:03 PM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Moving ACID from dynamic to static IP (Bob) > 2. Re: Moving ACID from dynamic to static IP (Doug Crompton) > 3. Re: Moving ACID from dynamic to static IP (Jim Duuuude) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 4 Apr 2014 13:18:52 -0700 > From: "Bob" <kk6ecm(a)gmail.com> > To: <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] Moving ACID from dynamic to static IP > Message-ID: <5AC934371D9A49E7A54F5A97DB1C91B3@ThePykesHP> > Content-Type: text/plain; charset="us-ascii" > > I can use some help... I want to move an Allstar ACID server from dynamic > to > static IP without a complete reinstall... It seemed to use a script during > install (I typed "N" at the time), which I am attempting to locate, or the > config file with an example. I've been looking through > /etc/sysconfig/networkscripts and found ifcfg-eth0, which says, > > > > DEVICE=eth0 > > BOOTPROTO=dhcp > > DHCPCLASS= > > HWADDR=54:04:A6:EB:BF:90 > > ONBOOT=yes > > DHCP_HOSTNAME=<server name> > > > > Can I modify this to: > > > > DEVICE=eth0 > > BOOTPROTO=none > > DHCPCLASS= > > HWADDR=54:04:A6:EB:BF:90 > > ONBOOT=yes > > DHCP_HOSTNAME= > > NETWORK=xxx.yyy.zzz.0 ;basic network address? > > NETMASK=255.255.255.0 > > IPADDR=xxx.yyy.zzz.27 ;static IP address > > > > Am I missing anything? I will be at a remote site, so want to have it > correct before the move, and can't test it at the current location. Hope > this is not wishful thinking. > > > > Thanks, > > Bob > > kk6ecm > > > >

1 0

Re: [App_rpt-users] RTCM with Com-spec TS-64 PL decoder
by Bryan Fields 02 Apr '14

02 Apr '14

On 4/1/14, 12:50 PM, Jeff DePolo wrote: > Did you ground the hang-up line on the TS-64? > > And have you measured the voltage on the logic line to see if it's changing > when PL is or isn't present? Yep, that was it. I feel stupid now :( Thanks! -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0

RTCM with Com-spec TS-64 PL decoder
by Bryan Fields 01 Apr '14

01 Apr '14

I'm trying to get this working and can confirm I have the white audio mute wire connected to the RTCM PL logic line. No matter if I toggle it normal or inverted it does not work. Has anyone interfaced with this before? Other than this it's working :) -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 62, Issue 1
by george＠dyb.com 01 Apr '14

01 Apr '14

Not sure how I got it to work. I requested the remote setup from the radio server setup (nodeconfig) and after one more failed attempt to push the config from the web site it did and does work. When stuff works I don't axe too many questions. GeorgeC > > 1. Sorry, your server does not have any downloadable nodes > (Register Only). (George Csahanin) > > > > OK folks, the one time I really wanted to setup a node from the web > tool I got the above error message. Fresh pickle download. I can find > nothing wrong. > > Can someone point me in the right direction? > > Thanks > > GeorgeC > 2360 > > This one will be 28599 and 2428 > > George J Csahanin > W2DB > Cedar Park, TX > 512-401-2630 home > 401-338-0568 cel > _______________________________________________

1 0

Sorry, your server does not have any downloadable nodes (Register Only).
by George Csahanin 01 Apr '14

01 Apr '14

OK folks, the one time I really wanted to setup a node from the web tool I got the above error message. Fresh pickle download. I can find nothing wrong. Can someone point me in the right direction? Thanks GeorgeC 2360 This one will be 28599 and 2428 George J Csahanin W2DB Cedar Park, TX 512-401-2630 home 401-338-0568 cel

1 0