- App_rpt-users - lists.keekles.org

Error during installation
by Marco Brunozzi 23 Dec '18

23 Dec '18

Hi, I'm trying to install asl from sources on my bananapi: Linux bananapim2plus 4.14.84-sunxi #3 SMP Sat Dec 1 07:18:41 CET 2018 armv7l GNU/Linux As explained here: https://wiki.allstarlink.org/wiki/ASL_FAQ During the installation appear some errors here: /var/lib/dkms/asl-dahdi-linux/2.11.1/build/make.log Especially this: make -C linux all make[1]: Entering directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi/firmware' make[2]: Leaving directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi/firmware' make -C /lib/modules/4.14.84-sunxi/build SUBDIRS=/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi DAHDI_INCLUDE=/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/include DAHDI_MODULES_EXTRA=" " HOTPLUG_FIRMWARE=yes modules DAHDI_BUILD_ALL=m make[2]: Entering directory '/usr/src/linux-headers-4.14.84-sunxi' Makefile:644: arch/-a: No such file or directory Makefile:644: armhf/Makefile: No such file or directory make[2]: *** No rule to make target 'armhf/Makefile'. Stop. make[2]: Leaving directory '/usr/src/linux-headers-4.14.84-sunxi' Makefile:74: recipe for target 'modules' failed make[1]: *** [modules] Error 2 make[1]: Leaving directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux' Makefile:9: recipe for target 'all' failed make: *** [all] Error 2 What can I do? Thanks, Marco IW0RED -- Marco Brunozzi Tel. +14152360004 Cel. +393483343274 Skype: marco.brunozzi Twitter: marcobrunozzi ---------------------------------------

1 0

hub to simpleusb
by ea8ee 22 Dec '18

22 Dec '18

I have used my node as a hub for a long time and now I want to use it as a simple usb with uri which files I should modify

2 1

MDC-1200 & Notch FIlter
by John 22 Dec '18

22 Dec '18

Hello to the group, Please pardon - I'm a noobie at some of this... I am trying to get MDC1200 encode and decode operating on an RPi3 that is running the most updated Hamvoip build. I followed instructions at http://docs.allstarlink.org/drupal/node/104 and cloned the KA6SQG mdc-encode-decode library and copied all the .c and .h files into the apps directory. I also did the same for mkfilter. I attempted to compile the latest version of Allstar on github with the #include lines for encode, decode and notch filter uncommented in app_rpt.c. ./configure completes without any errors, but I get the following error when it gets to doing something with aelparse. collect2: error: ld returned 1 exit status /usr/src/Asterisk/asterisk/Makefile.rules:78: recipe for target 'aelparse' failed make[1]: *** [aelparse] Error 1 rm simpleusb-tune-menu.o radio-tune-menu.o pi-tune-menu.o make[1]: Leaving directory '/usr/src/Asterisk/asterisk/utils' Makefile:364: recipe for target 'utils' failed make: *** [utils] Error 2 Note: I can't run the gcc 4.9 library on an Armv7 RPi3. Only v5.3.0 will compile. (Not sure if running 5.3.0 is causing the problem. The comments at https://github.com/AllStarLink/Asterisk say to run 4.9.) Please advise with instructions on how to solve this issue. Thank you kindly, and Merry Christmas. John R. Chartkoff, N1CTF Columbus, Ohio Cell: 850-902-1147

1 0

Allmon/2
by k7ilo1＠gmail.com 21 Dec '18

21 Dec '18

Hey gang. Quick question... I'v seen it thrown around in the group here but just wanted to know if this add on is part of the other group that claims to be the developers of Allstarlink. Just asking and hope not to stir up anything. That is not my intention. Thanks Harold K7ILO 27863

9 13

allmon2 question
by George Csahanin 21 Dec '18

21 Dec '18

I have allmon deployed on an internal server here. It works fine. I have a remote server I installed allmon on, modified allmon.ini.php, pointed the address for the allstar boxes here, opened ports to allow access, etc. But when looking at the allmon page on web browser all I get is the text inside index.php All files are identical between the two servers. Except for the changes in IP address for the allstar boxes. What am I doing incorrectly? GeorgeC W2DB 2360 -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

2 1

3. Limey Linux Questions / Help (Marshall Oldham)
by George Csahanin 20 Dec '18

20 Dec '18

> 3. Limey Linux Questions / Help (Marshall Oldham) > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users Marshall, just yesterday I updated my Limey to the latest allstar/asterisk. I first tried just replacing the app_rpt.c file but that didn't fly. So I got the whole thing from github and in Limey I did getsrc then in the source tree went into the asterisk directory and deleted all. Next dropped the new asterisk/allstar source in to the directory. Some make files have permissions set to where it would not compile but I simply did 'chmod 755 * -R' and then went back up to the /usr/src/astsrc directrory and did 'make genconfig' First menu came up no changes needed, escape out and then more time till the main menu for asterisk comes up. Select as needed, escape out, hit "S" for save and let it compile. I got errors when the system was out of memory. So I tried again but eliminated echolink, channel voter and stuff I knew I didn't need. And especially the sound files, didn't compile them. They were already on the computer. Then it compiled and applied the new asterisk executable. But then you need to save it and for some reason the script "svastbin" didn't place the newly compiled asterisk on the cf card, so I moved it manually from /root and reboot, all went fine, it works great. My reason was to allow allmon to work with this node. The old 0.287 source didn't know about allmon. Hope this helps. Just curious, how long has your cf card been in service? Mine's been running since 2012. GeorgeC W2DB 2360 -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

1 0

Limey Linux Questions / Help
by Marshall Oldham 19 Dec '18

19 Dec '18

Greetings, Looking for some help on this. I am running an embedded Allstarlink node here at my house that originally installed. With the help of Jim we updated the software a few times many, many years ago. I am running Limey-linux micro linux distribution version 1.1.2 Linux version 2.6.30.5 (srodgers@steverod) (gcc version 4.3.3 (GCC) ) #1 PREEMPT Sat Oct 9 18:51:49 PDT 2010 Since then Allstarlink has grown and we have issued out node numbers that are 4xxxx. When I try and make a connection to a 4xxxx node I get the following. calnet*CLI> rpt fun 2066 *349902 Node Variable dump for node 2066: RPT_TXKEYED=1 RPT_RXKEYED=0 RPT_NUMLINKS=0 RPT_LINKS=0 TRANSFERCAPABILITY=SPEECH -- 5 variables == Parsing '/var/lib/asterisk/rpt_extnodes': Found [Dec 12 11:47:51] WARNING[3261]: channel.c:3051 ast_request: No channel type registered for 'irlp' -- <Zap/pseudo-209027774> Playing '/etc/asterisk/ke6pcv' (language 'en') == Refreshing DNS lookups. -- Hungup 'Zap/pseudo-209027774' Node Variable dump for node 2066: RPT_TXKEYED=0 RPT_RXKEYED=0 RPT_NUMLINKS=0 RPT_LINKS=0 TRANSFERCAPABILITY=SPEECH -- 5 variables I sent this question to Steve Rodgers and this was his reply. -----Original Message----- From: Steve Rodgers Sent: Wednesday, December 12, 2018 7:24 PM To: Marshall Oldham Subject: Re: Limey Linux Questions Hi Marshall, It's been a while, but as I recall, the 4xxxx number series was reserved for IRLP. There's probably a 1 or more tests in the code for 4xxxx in app_rpt.c. If your system is able to still compile Asterisk, Maybe someone who is local to you, and has more time then I do, and who knows C could take a look in the app_rpt.c file and find the lines which test for 4xxxx and try commenting them out and recompiling the code. Just make sure to save a copy the original app_rpt.c file in case something goes terribly wrong. Steve WA6ZFT ------------------------------------------------------- Is there someone out there that is familiar with Limey Linux and how it works that can help me out. I am guessing that all the Limey Linux out there has the same problem with regards to connecting to 4xxxx nodes. Can we fix this issue and update the app.rpt.c? Thanks Marshall - ke6pcv

1 0

Allmon
by George Csahanin 18 Dec '18

18 Dec '18

I have allmon installed and have only one active node to monitor, 2360. I get report on it : no connections. But I have connections. I'm running the last version of limey. What is missing from rpt.conf to make allmon work? GeorgeC W2DB -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

2 1

Reminder to Visit the New allstarlink.org Website
by Tim Sawyer 17 Dec '18

17 Dec '18

The future allstarlink.org website has been up and running continuously since we announced it a week or so back. So far the feedback has been great. We've made a couple of minor modifications based on that feedback. If you missed the announcement or just haven't had a chance to visit the new site there is still plenty of time to have a look before we roll it out. The new site is temporally at web-tpa.allstarlink.org. -- Tim WD6AWP

9 19

connection failed
by cnovey 16 Dec '18

16 Dec '18

Hi- Moved to another QTH- hooked up my Pi and set ports to forward as I had previously. I can connect- see Allmon, etc- but connections always fail- whether from Zoiper or from iaxRpt on the PC. Here is an excerpt of status while I tried to connect to a node: -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack == Spawn extension (zoiper, 48654, 9) exited KEEPALIVE on 'IAX2/kk6qms-8612' -- Call accepted by 173.82.59.253 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/173.82.59.253:4569-4483' -- Hungup 'DAHDI/pseudo-1029768121' -- Hungup 'DAHDI/pseudo-1580665299' Any help appreciated- Clifford - KK6QMS

4 11