- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] App_rpt-users Digest, Vol 65, Issue 8 Trouble Getting Registered
by stephen liggett 04 Jul '14

04 Jul '14

Trouble Getting Registered When I set up a static IP address, my asterisk does not register. When I am in DHCP, it does register, but I cannot receive calls. (I am able to call out to most other nodes). This is my [root@test network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none HWADDR=00:14:22:28:8c:90 ONBOOT=yes DHCP_HOSTNAME=test TYPE=Ethernet IPADDR=192.168.1.30 NETMASK=255.255.255.0 GATEWAY=192.168.1.1 Does anything look wrong with this? The port 4569 is forwarded on the ASIS router. IRLP works fine, BTW (whatever that means!). And I can shell in, ping sites, etc. Or, maybe something else is adrift. Any suggestions would be helpful. steve W3RX On Jul 2, 2014, at 10:43 AM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: Error 1 (Skyler F) > 2. Re: Error 1 (Bob) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 2 Jul 2014 08:29:15 -0600 > From: Skyler F <electricity440(a)gmail.com> > To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Error 1 > Message-ID: > <CAJNyT09jXA+vY5o6OA6g=udZ6Rm5X_zZ=rDtRCZB2ryp5x-H8g(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > I guess it didn't remember the stuff from yesterday, this is all it had > today > > [Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40764 > [Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40930 > [Jul 2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > [Jul 2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect > to the Echolink server server2.echolink.org > > > > > > On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm(a)gmail.com> wrote: > >> For sure Asterisk is not happy. A shot... sounds like the computer lost >> your URI/FOB USB address when it lost power. Need to reset using lsusb to >> identify address and reset devstr= parameters in the USB tune file. I?ve >> also had this problem when the network settings are not correct, but would >> bet on the devstr perameters. >> >> >> >> Bob >> >> kk6ecm >> >> >> ------------------------------ >> >> *From:* app_rpt-users-bounces(a)ohnosec.org [mailto: >> app_rpt-users-bounces(a)ohnosec.org] *On Behalf Of *Skyler F >> *Sent:* Tuesday, July 01, 2014 4:15 PM >> *To:* app_rpt-users(a)ohnosec.org >> *Subject:* [App_rpt-users] Error 1 >> >> >> >> I know it is probably on the archive a lot of places, but I am >> experiencing Error 1 sometimes. >> >> >> >> It is sometimes right off the bat when I reboot the system, sometimes not. >> I had it before, and I decided to reinstall from scratch. >> >> >> >> Is there anything i can do about this? The only thing I could think that >> may have led to this is the power cord accidentally coming loose once when >> the computer was on. >> >> >> >> >> >> Asteriscks died with error code 1 >> >> >> >> Automatically restarting >> >> >> >> Asteriscks died with error code 1 >> >> >> >> Automatically restarting >> >> >> >> Asteriscks died with error code 1 >> >> >> >> Automatically restarting >> >> >> >> >> >> >> >> ETC........................ >> >> >> >> >> >> Thnks for any help. >> >> >> >> Skyler Fennell >> >> amsatnet.info >> >> KD?WHB >> >> electricity440(a)gmail.com >> > > > > -- > Skyler Fennell > amsatnet.info > KD?WHB > electricity440(a)gmail.com >

4 3

New IP - node disconnects - Hungup...
by Bob 03 Jul '14

03 Jul '14

Any ideas why a node will keep doing the following? Occurs about ever 2-3 seconds. Then disconnects from the internet about every 15 minutes, reconnecting after a few moments. We just installed a new static IP address... the old one works fine, but is getting disconnected in a day or so. CLI> -- Hungup 'Zap/pseudo-780553757' -- Hungup 'Zap/pseudo-2112596248' -- Hungup 'Zap/pseudo-1679477062' -- Hungup 'Zap/pseudo-817509806' Thanks, Bob kk6ecm

1 0

Problem with audio from portable radio device to phone
by Cristian González Flores 03 Jul '14

03 Jul '14

Hi What is the difference between: .- URI to Simplex Motorola Cable .- URI to Duplex Motorola Cable Because we bought a while ago the first one and we have only audio from Phone-URI-GM300 to Portable radio device and not from Portable radio device to GM300->URI->Phone. The person who programmed the GM300 left him a bridge in the rear port, with that bridge could be heard through the speaker of the GM300 which was spoken in the portable radio device, but to connect the URI was necessary to remove the bridge and place the URICABLE since then not the speaker of the GM300 is heard. Our project is the following, from an IP phone to make a call to a radio. At this time we can call smoothly and through * 99 talk to the radio and heard perfect, however, speaking on the radio cant be heard on the phone. What could be the problem? Please your help and thank you su much in advance.

2 1

parameters in usbradio_tune file
by Bob Roszkowski 02 Jul '14

02 Jul '14

Can someone explain what the parameters rxvoiceadj and rxctcssadj do in usbradio_tune_XXXXX.conf file? Can't seem to find the documentation on it. thanks Sincerely, boB - W5EVH

3 2

Quick follow up on new user help
by Brian Gieryk 02 Jul '14

02 Jul '14

So my node computer will be here next week (maybe saturday) (THANK YOU Dave!) In the interim, working on the radio interface. I have a URI (somewhere) and a Signalink USB. My question is this: Is the Signalink supported by Allstar, or do I need to dig the URI out? Thanks in advance, Brian KE6IYC

3 2

SIP hack attempts
by Robert Newberry 02 Jul '14

02 Jul '14

With help from the list I think I've thwarted the attemps. I've been monitoring the CLI and check /var/log/asterisk/messages things have quite down. I also cleaned out the messages folder. Are there any house keeping task I should also be doing?

1 0

What??
by Jim W7RY 01 Jul '14

01 Jul '14

What is this all about? Spam? 73 Jim W7RY Your membership in the mailing list App_rpt-users has been disabled due to excessive bounces The last bounce received from you was dated 01-Jul-2014. You will not get any more messages from this list until you re-enable your membership. You will receive 3 more reminders like this before your membership in the list is deleted. To re-enable your membership, you can simply respond to this message (leaving the Subject: line intact), or visit the confirmation page at http://ohnosec.org/cgi-bin/mailman/confirm/app_rpt-users/e7beae6492043cf881… You can also visit your membership page at http://ohnosec.org/cgi-bin/mailman/options/app_rpt-users/w7ry%40centurytel.…

2 2

Secret DTMF
by Skyler F 01 Jul '14

01 Jul '14

The repeater site I will be installing allstar node on is part of a club that they want to people to pay a small yearly fee to use their services. Although I am for setting up a free system, they insist that I have some secret DTMF codes instead of the default for the system. The codes I want to change: *3 <node you want to connect to > *1 <node you want to dissconnect to> *71 <dissconnect all> *33 <Echolink node you want to connet to> I want to change the disconnect all to plain *73, *no stars or nothing if that is possible I would like to change the connect to <allstar node> to a *Number *then a ** *for example 4* <allstar to connect to> (I would like to tell yaal the exact number before the star but I don't want to get in trouble) I would like to do similar to above for Echolink and Dissconnect the specific node. Is that all possible and will it work fine? Im still a newbie so could I have help on changing it? -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

3 3

Re: [App_rpt-users] App_rpt-users Digest, Vol 65, Issue 1
by Steve Liggett 01 Jul '14

01 Jul '14

Doug, The BeagleBone Black that I ordered from one of the vendors on your page states that it is version C, and is run under Debian. Did I order the wrong thing? steve W3RX On Jul 1, 2014, at 9:54 AM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: Lincoln Highway (US RT 30) Coast to Coast Link-Up / LH > Yard Sale (mike(a)midnighteng.com) > 2. Re: BeagleBone Black Allstar Official Release (barbagris) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 30 Jun 2014 15:37:53 -0700 > From: <mike(a)midnighteng.com> > To: "App-RPT Group" <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Lincoln Highway (US RT 30) Coast to Coast > Link-Up / LH Yard Sale > Message-ID: > <20140630153752.71befee5dbd13c5325dd1a521b4e73ee.a025a5b385.wbe(a)email06.secureserver.net> > > Content-Type: text/plain; charset="us-ascii" > > An HTML attachment was scrubbed... > URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20140630/bfa7e9d7/at…> > > ------------------------------ > > Message: 2 > Date: Tue, 1 Jul 2014 15:54:31 +0200 > From: "barbagris" <ea2bkh(a)ea2bkh.com> > To: "Doug Crompton" <doug(a)crompton.com>, <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] BeagleBone Black Allstar Official Release > Message-ID: <8B050B60FDB34F258780570DFDBF962E@fujitsu> > Content-Type: text/plain; charset="iso-8859-1" > > Hi there > Doug thank you very much, this was waiting for me. > Thanks again. > 73s Kind > John > ea2bkh > ----- Original Message ----- > From: Doug Crompton > To: app_rpt-users(a)ohnosec.org > Sent: Thursday, June 26, 2014 7:02 AM > Subject: [App_rpt-users] BeagleBone Black Allstar Official Release > > > Hello and welcome to the first public release of Allstar on the BeagleBone Black. This represents months of trial and error testing which first started with the Raspberry Pi back at the beginning of the year and was finally successful on the BBB platform. We have had several beta versions out now for over two months with many testers and we had very good reports. There is more to be done but this is a working system that will allow many to get rid of their energy consuming PC's with constantly running hard drives and have an Allstar system that fits in the palm of your hand. > > The web page I have created gives very detailed instructions on how to download, install, and configure your BBB for use with Allstar. The web page is: > > hamvoip.org > > There you will find a link to download the image and also to join the arm-allstar email list. Please try to address questions specific to the BBB and Allstar to the arm-allstar list and not the apt-rpt list. > > While the code is the current Acid release there are many differences in how things are done on the BBB and the OS we are using, Arch Linux, is much different than Centos or Debian. Please refer to the web page for detailed info on some of the differences. We also recommend that you NOT use the nodesetup routine that is offered on the standard Acid release. In many ways this is faulty and often more trouble than it is worth. For that reason we have renamed nodesteup on the image and made it non-executable. Besides what is described on the web page there is a very detailed how-to describing first time setup of the config files. We encourage you to edit the existing config files rather than wholesale copying your existing configs on top of the examples. There is a little learning involved but in the long run it is good to know how things work by configuring the files on your own. > > We also encourage you to make image backups once you have your system configured. This will avoid having to recreate your configuration should a failure of some kind occur. While we have not seen any problems with power failures and as far as we know not one SD card has ever failed running Allstar there is always a first time and better safe than sorry. > > This release does not have the backup/restore scripts that we promised but they will be available soon. Basically what they will do is copy /etc/asterisk and all directories under it in entirety into a tar file and then you would use winscp or a similar file copy program to transfer the tar file to another computer. This would allow you to make updates of the image when new code is released in the future without losing your former configuration. For now you can do this manually. See the howto on the web page for instructions on doing image and directory backups. It is not hard to do and well worth the piece of mind. > > Have fun and I hope you enjoy your new BBB Allstar node. There will be many more features and upgrades available in the future all of which will be announced on the arm-allstar email list. There are already plenty of experienced users on the list that can help you with any problems you might have. > > 73 Doug, WA3DSP > > > > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >

2 1

Help for a green to the gills new user…….
by Brian Gieryk 01 Jul '14

01 Jul '14

I am a hardware guy, through and through. I can figure out how to send an email (duh!) and that about sums up my computer knowledge. I have tried to install ACID on numerous previous occasions, but I am obviously doing something wrong. It will, and has, gotten to various parts of the install process, and just plain quit. Sometimes, to the point it won't even boot, sometimes to a log in prompt. When it completes to the login, I hit a brick wall, because, even though the getting started PDF is well written, it assumes some level of *nix ability, which I have zero. Sadly, I have little patience for new computer things. Should I be pursuing other projects, as opposed to raising my stress level fighting with Allstar? From reading the posts, I keep getting the feeling that this is too far over my head..... Any advice is appreciated...... Brian KE6IYC

1 0