- App_rpt-users - lists.keekles.org

BeagleBone Black Allstar Official Release
by Doug Crompton 01 Jul '14

01 Jul '14

Hello and welcome to the first public release of Allstar on the BeagleBone Black. This represents months of trial and error testing which first started with the Raspberry Pi back at the beginning of the year and was finally successful on the BBB platform. We have had several beta versions out now for over two months with many testers and we had very good reports. There is more to be done but this is a working system that will allow many to get rid of their energy consuming PC's with constantly running hard drives and have an Allstar system that fits in the palm of your hand. The web page I have created gives very detailed instructions on how to download, install, and configure your BBB for use with Allstar. The web page is: hamvoip.org There you will find a link to download the image and also to join the arm-allstar email list. Please try to address questions specific to the BBB and Allstar to the arm-allstar list and not the apt-rpt list. While the code is the current Acid release there are many differences in how things are done on the BBB and the OS we are using, Arch Linux, is much different than Centos or Debian. Please refer to the web page for detailed info on some of the differences. We also recommend that you NOT use the nodesetup routine that is offered on the standard Acid release. In many ways this is faulty and often more trouble than it is worth. For that reason we have renamed nodesteup on the image and made it non-executable. Besides what is described on the web page there is a very detailed how-to describing first time setup of the config files. We encourage you to edit the existing config files rather than wholesale copying your existing configs on top of the examples. There is a little learning involved but in the long run it is good to know how things work by configuring the files on your own. We also encourage you to make image backups once you have your system configured. This will avoid having to recreate your configuration should a failure of some kind occur. While we have not seen any problems with power failures and as far as we know not one SD card has ever failed running Allstar there is always a first time and better safe than sorry. This release does not have the backup/restore scripts that we promised but they will be available soon. Basically what they will do is copy /etc/asterisk and all directories under it in entirety into a tar file and then you would use winscp or a similar file copy program to transfer the tar file to another computer. This would allow you to make updates of the image when new code is released in the future without losing your former configuration. For now you can do this manually. See the howto on the web page for instructions on doing image and directory backups. It is not hard to do and well worth the piece of mind. Have fun and I hope you enjoy your new BBB Allstar node. There will be many more features and upgrades available in the future all of which will be announced on the arm-allstar email list. There are already plenty of experienced users on the list that can help you with any problems you might have. 73 Doug, WA3DSP

13 14

Re: [App_rpt-users] App_rpt-users Digest, Vol 65, Issue 2
by Bradley Haney 01 Jul '14

01 Jul '14

tried to download XIPAR showing site is down? On Tue, Jul 1, 2014 at 11:00 AM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: QUESTION on making a receive only node (REDBUTTON_CTRL) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 01 Jul 2014 11:17:31 -0400 > From: REDBUTTON_CTRL <jrorke(a)cogeco.ca> > To: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] QUESTION on making a receive only node > Message-ID: <53B2D10B.8060309(a)cogeco.ca> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > If you can get discriminator audio out of your radio then you should be > able to use that on an unmodified dongle. That way you can have the RX > node do the tone decoding and squelch. > > Not familiar with the Yaesu 2600 but if it has a packet connector you > should find discriminator audio there. Might have to put theradio in > 9600 baud mode to getthe right stuff on the connector. If not then you > might want to look at at some other radios where you can get > discriminator audio out. > > Jon VA3RQ > > On 6/30/2014 12:42 AM, Jim W7RY wrote: > > Agreed 100%!! > > 73 > > Jim W7RY > > *From:* George Csahanin <mailto:george@dyb.com> > > *Sent:* Sunday, June 29, 2014 9:23 PM > > *To:* Tim Sawyer <mailto:tim.sawyer@mac.com> ; Bradley Haney > > <mailto:hammin75@gmail.com> > > *Cc:* app_rpt-users(a)ohnosec.org <mailto:app_rpt-users@ohnosec.org> > > *Subject:* Re: [App_rpt-users] QUESTION on making a receive only node > > Not just level but speaker audio (should) has filtered audio and PL > > won't be there...speaker audio = bad audio.(Editorial comment: this is > > one way Echolink gets to sound Soooooooo bad) > > George J Csahanin > > W2DB > > Cedar Park, TX > > 2360 > > *From:* Tim Sawyer <mailto:tim.sawyer@mac.com> > > *Sent:* Sunday, June 29, 2014 10:29 PM > > *To:* Bradley Haney <mailto:hammin75@gmail.com> > > *Cc:* app_rpt-users(a)ohnosec.org <mailto:app_rpt-users@ohnosec.org> > > *Subject:* Re: [App_rpt-users] QUESTION on making a receive only node > > Nope, the USB dongle MIC input only needs a few hundred millivolts. > > Speaker is way more that that. What are you intending to sue for the > > receiver? Perhaps someone on this list will be familiar with your > > radio and can suggest a better place to get audio. > > -- > > Tim > > :wq > > On Jun 29, 2014, at 8:12 PM, Bradley Haney <hammin75(a)gmail.com > > <mailto:hammin75@gmail.com>> wrote: > > > >> Hello all we would like to extend our repeater receive area by > >> putting in a receive site but with a different PL tone . we have an > >> area that we lose HT coverage but can hear it fine from the main tx > >> of the repeater site. . Could i just buy a USB FOB CM108 and not > >> mod it and just plug in the speaker from the radio into the Mic of > >> the dongle? > >> Thanks for your help > >> _______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >> > >> To unsubscribe from this list please visit > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll > >> down to the bottom of the page. Enter your email address and press > >> the "Unsubscribe or edit options button" > >> You do not need a password to unsubscribe, you can do it via email > >> confirmation. If you have trouble unsubscribing, please send a > >> message to the list detailing the problem. > > > > ------------------------------------------------------------------------ > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll > > down to the bottom of the page. Enter your email address and press the > > "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > > confirmation. If you have trouble unsubscribing, please send a message > > to the list detailing the problem. > > > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down > to the bottom of the page. Enter your email address and press the > "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. >

1 0

QUESTION on making a receive only node
by Bradley Haney 01 Jul '14

01 Jul '14

Hello all we would like to extend our repeater receive area by putting in a receive site but with a different PL tone . we have an area that we lose HT coverage but can hear it fine from the main tx of the repeater site. . Could i just buy a USB FOB CM108 and not mod it and just plug in the speaker from the radio into the Mic of the dongle? Thanks for your help

5 5

Re: [App_rpt-users] Lincoln Highway (US RT 30) Coast to Coast Link-Up / LH Yard Sale
by mike＠midnighteng.com 30 Jun '14

30 Jun '14

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 64, Issue 65
by Steve Wright 30 Jun '14

30 Jun '14

usually just google your topic.. if its in the archives google will find it. Good dog google! On Mon, Jun 30, 2014 at 4:00 AM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Searching Archives (Steve Denbow) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 29 Jun 2014 11:56:08 -0400 > From: Steve Denbow <kd8biw(a)gmail.com> > To: app_rpt-users(a)ohnosec.org > Subject: [App_rpt-users] Searching Archives > Message-ID: > <CABNg= > HMy6kOgRYg462_wNxn9w3ojfKvOsbGRHd7SyZ+0wf-g3A(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Is there a way to search through the email list archives for something? > Instead of asking the same questions over and over, I would like to be > able to research it before asking away. Thanks! > > -- > Steve Denbow | KD8BIW > Ohio 220 Group > Node 29912 > kd8biw(a)gmail.com > www.kd8biw.com >

6 6

Re: [App_rpt-users] App_rpt-users Digest, Vol 64, Issue 65
by Skyler F 30 Jun '14

30 Jun '14

Ok dumb me I should've checked now. Last time I was on it, it wouldn't let me do anything like post a question because it was like "we were hacked" On Mon, Jun 30, 2014 at 6:53 AM, Kevin Custer <kuggie(a)kuggie.com> wrote: > On 6/30/2014 8:44 AM, Skyler F wrote: > >> Why can't app_rpt have a forum? I found this http://www.allstarnode.com/ >> but it doesen't work. >> > > What is it that you believe doesn't work? > > Kevin > -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

1 0

Re: [App_rpt-users] Lincoln Highway (US RT 30) Coast to Coast Link-Up / LH Yard Sale
by mike＠midnighteng.com 29 Jun '14

29 Jun '14

1 0

Re: [App_rpt-users] Lincoln Highway (US RT 30) Coast to Coast Link-Up / LH Yard Sale
by mike＠midnighteng.com 29 Jun '14

29 Jun '14

1 0

Lincoln Highway (US RT 30) Coast to Coast Link-Up / LH Yard Sale
by mike＠midnighteng.com 29 Jun '14

29 Jun '14

4 3

ACID Yum Updates/CentOS questions
by Stephen - K1LNX 29 Jun '14

29 Jun '14

Hi guys... been dormant for a while and I'm in the process of resurrecting my Allstar box. As such, it's been dormant for over a year and the first thing I did was run a Yum update on it which included a new kernel... and yep you guessed it, it killed my Zaptel modules :( I was able to recompile them manually so it wasn't a big deal, but had a couple of questions: - is there a more automated way of dealing with this? (script etc) - Is ACID still based on CentOS 5.x... or is 6 in use now? tnx Stephen K1LNX

2 1