- App_rpt-users - lists.keekles.org

Compiling app_rpt with Fedora 18 on Cubieboard
by Peter Watkins 07 Jun '13

07 Jun '13

Dear all, I've purchased a Cubieboard to connect with a URI and app_rpt. I've been attempting to compile the software using Fedora 18 (for Cubieboard), largely step-by-step with phase1.sh, and using a slightly modified phase2.sh. All went well with phase1.sh but I have an error with the phase2.sh script - the output is as follows: ... Generating input for menuselect ... make[1]: Entering directory `/usr/src/astsrc/zaptel' echo "You do not appear to have the sources for the 3.4.24-1.0.a10.fc18.armv7hl.a10 kernel installed." You do not appear to have the sources for the 3.4.24-1.0.a10.fc18.armv7hl.a10 kernel installed. exit 1 make[1]: *** [modules] Error 1 make[1]: Leaving directory `/usr/src/astsrc/zaptel' make: *** [all] Error 2 Failure: Unable to compile Zaptel 2 Fatal error: Unable to install Asterisk! I checked the kernel headers, and these are later than those shown above; [root@cubie-f18-v7hl ~]# yum -y install kernel-devel kernel-headers Loaded plugins: langpacks, presto, refresh-packagekit Package kernel-imx-devel-3.6.10-8.fc18.armv7hl already installed and latest version Package kernel-headers-3.9.4-200.fc18.armv7hl already installed and latest version Nothing to do I think that the obvious thing is to install the above kernel sources, but I'm not quite certain how to do this> Can someone point me in the right direction? Or suggest a workaround? Thanks Peter

1 0

Echolink Announcements
by Vince VE3ELB 05 Jun '13

05 Jun '13

Hello All. I am having a small problem I hope someone can help me out. My Allstar node has Echolink and it works great it announces every call that connects. Now that I have linked my Allstar node to another Allstar node when some connects to my node from Echolink I will hear the call sign but on the other node I will hear node numbers not a call sign. How can I have the other linked node say the call sign. Example: VE3ELB via Echolink connecting to. Node: 29321 will announce VE3ELB connected. Node 29321 is linked to node 28507 Node: 28507 will announce node 123456 connected. I would like both nodes to say the call sign of the connecting station Any help will be great. Thank you. Vince VE3ELB Allstar Node: 29321

1 0

Using the Schedular?
by area51now＠aol.com 04 Jun '13

04 Jun '13

I am new toallstar link and am curious about the scheduler under node configuration on theallstar site. Can it be set to automatically link or unlink from a node? If socan anyone point me to where I can find info on this? Thanks Bob

2 1

Cannot Receive Incoming Connections From Other Allstar Link Nodes
by Aaron Wardyn 03 Jun '13

03 Jun '13

Cannot Receive Incoming Connections From Other Allstar Link Nodes. I can connect to others fine. I checked my port-forwarding and it's setup correct for port 4569 UDP. My node is 29607. Thanks, KD0ENX Aaron Wardyn

4 3

Need connection for msf5000.
by pete M 03 Jun '13

03 Jun '13

Been looking all over the place for a good info on how to interface my msf5000 to my URI. Got some stuff that point to some test point, but I just cant find them on the digital control board. Anyone have a photo or a service manual the point where are the test point on the controler so that I can find them? Getting pretty frustrated here...

3 2

Error: Too many open files
by Bob Roszkowski 02 Jun '13

02 Jun '13

I usually keep connected to my hub node watching the CLI, I noticed the hub was acting weird. The screen showed the following error: "WARNING[7520]: asterisk.c:1011 listener: Accept returned -1: Too many open files" Tried looking at the log but noticed it was 750Mb. I was in the process of renaming it to view later and accidentally deleted it. Has anyone else had this error? -- boB - W5EVH

1 0

Re : Re: Need connection for msf5000.
by pete M 02 Jun '13

02 Jun '13

Thats the info I have!.. but cant find the physical place on the board!.... Unless I dont look at the good board.. ;-) --- Message initial --- De : "Bryan D. Boyle" <bdboyle(a)bdboyle.com> Envoyé : 2 juin 2013 17:01 A : "pete M" <petem001(a)hotmail.com> Cc: App_rpt-users(a)ohnosec.org Objet : Re: [App_rpt-users] Need connection for msf5000. from my notes: all on control board. tp3: discriminator rx tp4: tx in tp9: ptt active low ag: ground there's extensive docs on repeater-builder.com, free for the asking, that goes into EVERYTHING you may need to know about interfacing to the 5k. -- Bryan Sent from my iPhone 5...small keyboard, big fingers...please forgive misspellings... On Jun 2, 2013, at 16:36, pete M <petem001(a)hotmail.com> wrote: > Been looking all over the place for a good info on how to interface my msf5000 to my URI. > > Got some stuff that point to some test point, but I just cant find them on the digital control board. > > Anyone have a photo or a service manual the point where are the test point on the controler so that I can find them? Getting pretty frustrated here... > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

Announcements
by Russ WL7LP 01 Jun '13

01 Jun '13

How Do you stop the lady from announcing what nodes are connecting and disconnecting over the air. 73 Russ WL7LP

4 3

Allmon on ACID
by Chris Andrist 31 May '13

31 May '13

I have been trying for a few days to get Allmon to work with my nodes. For some reason it will not login via the manager interface. Are there some detailed instructions to get it installed. I have read the README at https://github.com/tsawyer/allmon/blob/master/README several times and still not able to get it to connect. I have also edited manager.conf 8-10 times and still am unable to make it work. I am not new to Linux or Asterisk at all, but for some reason I can't get this to work. Regards, Chris Andrist, KC7WSU

2 2

allmon on xipar
by Branden Watson 30 May '13

30 May '13

has anyone gotten Allmon to work on Xipar? If so would you mind sharing some directions?

2 1