October 2013 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Pin out
by DougH 20 Oct '13

20 Oct '13

URI pin /Function RC210 1 PTT 7 COR 8 COR_DETECT 3 PTT 20 GROUND 9 GND 21 MIC_IN_AC 4 TXA 22 LEFT_OUT_AC 5 RXA D

1 0

Re: [App_rpt-users] Pin out
by Richard Szajkowski 20 Oct '13

20 Oct '13

thanks , this helps 100% Going to try and build the cable after supper , and then connect it to the repeater One step at a time Thanks for all the help Richard Szajkowski > On Oct 20, 2013, at 2:01 PM, REDBUTTON_CTRL <jrorke(a)cogeco.ca> wrote: > > Hi Richard, here are 2 diagrams to wire a radio to the URI with RLC/RC 210 wiring and also a crossover cable if you want to connect to the cobntroller. > > If you want direct wiring follow both diagrams to make a single cable.. > > Essentially you want use the URI to radio diagram but reverse the TXA and RXA lines and PTT and COR lines and gender of the db 9 cable to mate with the RLC/RC 210 co9ntroller. > > See attached schematics. > > Regards, > > Jon VA3RQ > >> On 10/20/2013 1:51 PM, Richard Szajkowski wrote: >> Going to try this again, >> >> Any one have the pin to pin they are useing for a URI to Arcom / linkcomm controller >> >> >> >> Richard Szajkowski >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > <HAM CONTROLLER CROSSOVER CABLE.pdf> > <URI INTERFACE.pdf>

1 0

Pin out
by Richard Szajkowski 20 Oct '13

20 Oct '13

Going to try this again, Any one have the pin to pin they are useing for a URI to Arcom / linkcomm controller Richard Szajkowski

1 0

Liney and AllMon
by David Osborn 20 Oct '13

20 Oct '13

I'm trying to get AllMon to talk to my Limey Node with no success. Accessing the node locally, and connecting to the Asterisk Call Manager via Telnet, I get no joy when I try to log-in, which explains why AllMon can't talk to it. Following the same procedure on an Acid-based node, I can log-in to the call manager and get responses, so I presume that there is some difference between the build of Asterisk for Limey and that for Acid. Am I on the right track here, and is there anything I can do to be able to monitor/control my Limey box with AllMon? David GD4HOZ

2 2

Cable
by Richard Szajkowski 19 Oct '13

19 Oct '13

Any one make cables from the uri to a RLC 2a / Arcom 210 ?? I just can see that good for fine work anymore , I tried and killed a number of connectors with solder jumpers , good thing foe solder wick If any one can help that would be great Thanks Richard Szajkowski

1 0

Re: [App_rpt-users] DHCP to Static - failure.
by Angelo Glorioso 19 Oct '13

19 Oct '13

Thanks to all who gave great advise. It was the eth0 in the down instead of up mode. It is working fine now. 7 3 de Angelo ----- Original Message ----- From: Chuck Henderson To: Angelo Glorioso Cc: app_rpt mailing list Sent: Friday, October 18, 2013 2:05 PM Subject: Re: [App_rpt-users] DHCP to Static - failure. What do you see if you do netstat -rn On Oct 18, 2013 1:34 PM, "Angelo Glorioso" <n5uxt(a)hotmail.com> wrote: I have changed from DHCP at home to a repeater site with Static Ip addresses. I have run the system-config-network and changed the ip address, the gateway, the network mask. I have gone into the DNS entries as well. It seens there is not route in the kernal. When I try and tracertoute to an outside ithe network, I get network unreachable. It seems the route is missing.. Any help would be appreciate it. I am still at the site.. 7 3 de Angelo --------------------------------------------------------- If you don't ask, you will never know!! _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Static IP
by Richard Szajkowski 19 Oct '13

19 Oct '13

Ok having a problem with static IP I set it via set up , rebooted the system Did a ifconfig and I see the right info But for some reason I can't get to the outside world Some one said I needed to do a DNS update , I can't find that info, Thanks for all your help Richard Szajkowski

4 4

Re: [App_rpt-users] Anyone have any ideas?
by kk6ecm 18 Oct '13

18 Oct '13

Check to see if the Beagle boots off the original SD card; Checking if it is a hardware or software issue. Bob KK6ECM On Oct 18, 2013, at 9:00 AM, app_rpt-users-request(a)ohnosec.org wrote: > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 18 Oct 2013 20:56:49 +1100 > From: "R.K." <vk3ant(a)optusnet.com.au> > To: <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] Anyone have any idea ? > Message-ID: <832C603E74CB4C1EB920F9C2E13C92A5@RKPC> > Content-Type: text/plain; charset="utf-8" > > > Hi group, > > Been trying to set up my Beagle/LOX combo but have been having some issues. > > Anyway, been accessing it via a serial cable and PuTTY, been playing with the config, nodesetup and everything has been going as well as it could, until I shut it down one night, got up the next morning with a fresh mind, fired up the gear, plugged in the serial cable, clicked on server, download config, initiate in the Portal and the response I got was ? Sorry, your server does not have any downloadable nodes ( Register Only ) ? > > Does anyone understand what this message is, why am I getting it. Didn?t think that whatever parameters I put in the Portal and downloaded to the Beagle would corrupt it, so why is it now telling me I have no downloadable nodes, I don?t understand, I have had no problems for the past year that I have been playing with this thing. > > To make matters worse, I can?t log in to my Beagle with PuTTY either, I enter the Com port and baud rate and all I get is a blank screen, can do nothing with it so I guess this also has something to do with me not being able to configure my Beagle through the Portal. > > Anyone got any thoughts please. > > Thanks. > Ron > VK3ANT >

5 4

Re : Static IP
by pete M 18 Oct '13

18 Oct '13

Need ro fix resolv.conf http://www.dnsknowledge.com/q-a/howto-edit-etcresolv-conf-file-in-centos/ --- Message initial --- De : "Richard Szajkowski" <va3rzs(a)gmail.com> Envoyé : 18 octobre 2013 13:14 A : "app rpt-users" <app_rpt-users(a)ohnosec.org> Objet : [App_rpt-users] Static IP Ok having a problem with static IP I set it via set up , rebooted the system Did a ifconfig and I see the right info But for some reason I can't get to the outside world Some one said I needed to do a DNS update , I can't find that info, Thanks for all your help Richard Szajkowski _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

DNS/minicomm
by Richard Szajkowski 18 Oct '13

18 Oct '13

Found a fix thanks Dhclient worked great Found the problem when I wanted to install minicomm but after I fixed it says there is no mini comm available I want to be able to program my controller (old RLC2a) form the allstar box Any help would be great Richard Szajkowski

2 1